Tools

- “T”-handle Clamp With Swivel Base
- 3/8” Locking Pin For Locking And Unlocking Unit
- Cable Space Between Rollers Is Approx. 4”x 4”
- Capacity 300 Lb
- Highly Durable
- 5 Year Warranty

- Working Load – 600 lbs
- Can Be Extended Above The Cable Tray By Using The Optional HBFB Extension With The Standard Cross-bar
- Using The Optional 90 Degree Bracket With The Cross-bar The HB1A-9 Can Be Mounted With The Force Rollers On The Sides Above or Below Cable Tray
- Includes Ball-bearing Rollers For Reduced Pulling Tension

- Working Load: 600 lbs.
- Replacement Tray Clamp For HB3AX48
- Highly Durable
- 5 Year Warranty

- Designed To Help Make Cable Tray Pulls Easier By Helping To Guide and Roll Cable Through Cable Tray.
- 5" Aluminim Sheave With Self-lubricating Bearings.
- Tray Frame Housing Will Easily Attach To Cable Tray Up To 2" Thick.
- Clamping Bar and All Mounting Hardware Included.
- 9.5" Maximum Tray Rung Spacing (Including Tray Rungs)

Side Tray Clamp for Mounting to Side of Cable Tray - Usable with HB9A/ HB1A-9 Rollers

- Adjustable Cable Tray Clamps For Multiple Setup Configurations
- 48" Base Is Usable With Multiple Tray Roller Configurations
- Ball-bearing Rollers For Reduced Pulling Tension
- Rollers Create a Minuimum Bend Radius
- For Use Guiding Cables Around Outside Vertical Risers & Through Straight--sections In Cable Tray

• Ball-Bearing Rollers for Reduced Pulling Tension
• Rollers Create a Minimum Bend Radius
• For Use Guiding Cables Around Outside Vertical Risers & Through Straight-sections In Cable Tray
• One-piece Cast Aluminum Housing
• Open Top for Easy Access
• Single Point for Securing To Crossbar

- Designed To Help Make Cable Tray Pulls Easier By Helping To Guide and Roll Cable Through Cable Tray.
- 5" Aluminim Sheave With Self-lubricating Bearings.
- Tray Frame Housing Will Easily Attach To Cable Tray Up To 2" Thick.
- Clamping Bar and All Mounting Hardware Included.
- 19.5" Maximum Tray Rung Spacing (Including Tray Rungs)

- Standard 12” Dia X 5” Wide Alloy Aluminum Sheave and Horizontal Sheave Bracket With 3/4” Dia Axle
- Standard 12” Dia X 5” Wide Alloy Aluminum Sheave and Horizontal Sheave Bracket With 3/4” Dia Axle
- Ball-bearing Rollers for Reduced Pulling Tension

- Adjustable Cable Tray Clamps for Multiple Setup Configurations
- 48" Base Is Usable With Multiple Tray Roller Configurations
- Standard 12” Dia X 5” Wide Alloy Aluminum Sheave and Vertical Bracket With 3/4”dia Axle
- Designed for Guiding Cable Around Turns In Cable Tray

- Adjustable Cable Tray Clamps for Multiple Setup Configurations
- 48" Base Is Usable With Multiple Tray Roller Configurations
- Standard 12” Dia X 5” Wide Alloy Aluminum Sheave and Vertical Bracket With 3/4”dia Axle
- Designed for Guiding Cable Around Turns In Cable Tray

- Standard 12" Diameter X 5" Wide Alloy Aluminum Sheave and Horizontal Sheave Bracket With 3/4" Diameter Axle.
- Designed for Guiding Cable Into Inside Vertical Risers In Cable Tray
- Ball-bearing Rollers for Reduced Pulling Tension

- Working Load – 600 lbs
- Used Inplace of HBFB Side Tray Clamps To Suspend HB1A-9 Below 48" Cross-bar
- Highly Durable
- 5 Year Warranty

- Extended Outside Vertical Riser and Straight Section Roller With 48" Crossbar and Clamps
- Capacity of 600 lbs
- Extended Outside Vertical Riser and Straight Section Roller
- Universal Split Box Roller
- Crossbar With Tray Clamps
- Ball-bearing Rollers for Reduced Pulling Tension
- Cable Space Between Rollers Is Approxmiately 4-5/8" X 4-3/4"
- One-piece Cast Aluminum Housing
- Open Top for Easy Access

90 Degree Bracket - For Adjustable 90 Degree Mounting of The HB1A-9 Tray Roller