Tools

- Toolless Install Pins Work as Convenient Reference Points to Level Flange for Tack and Weld-out
- Hardened Pins Automatically Center On 1-1/2" To 2-5/8" (38 To 66 Mm) Holes or Flange Thickness 4-5/8" To 6-3/8" (117 To 1622 Mm)
- Features Acme Threads For Maximum Clamping Power And Hardened Steel For Long-lasting Use

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

- Toolless Install Pins Work as Convenient Reference Points To Level Flange for Tack and Weld-out
- Hardened Pins Automatically Center On 5/8" To 1-5/8" (16 To 42 mm) Holes
- Features Acme Threads for Maximum Clamping Power and Hardened Steel For Long-lasting Use

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

- Uses Gravity To Align Fittings for Loads Up To 45 Degrees
- Fastens Directly Onto Fittings for Loads Up To 1,000 lb
- Threaded Shaft Assembly Is Hardened for Long Tool Life
- Cloverleaf Setscrew and Threaded Shaft Handle Work From Either Side

- Fits All Flanges for 5" Pipe and Larger With Bolt Holes 3/4" To 1-5/8" (19 To 42 mm)
- Used In Combination With The Adjust-A-Fit To Bring Pipe Flanges To Exact Plumb for Tack and Weld-out
- Handles Loads Up To 1,000 lb
- Flange Nuts Serve as Convenient Reference Points To Check Level

Sumner*'s Aluminum 24" x 16" Standard Squares from  Marked with Both Imperial and Metric Units.

- Fixed Magnetic Arms Accommodate 4" To 8" Steel Pipe or Tank
- Push Button Spring-loaded Striking Hammer
- Removable Digital Leveling Gauge With Magnetic Base
- Alignment Marks for Centering
- Digital Gage Can Be Used as Angle Finder

Sumner Chmr - Chipping Hammer's 10.5 Length Gives Good Leverage While Offering Excellent Balance and Control for Precise Chipping. Features Ergonomic Grip That Reduces Impact Vibration - Chisel Shaped End and a Wire Brush on The Other End - And a Solid - Lightweight Construction.

Sumner CSQ12 - 12" Combination Square Is a Professional Quality Tool with Accurate - High Contrast Black Precision-etched Scales That Are Easy To Read. Features a Corrosion Resistant Stainless Steel Blade and Convenient Brass Scoring Tool Housed In the Handle.

The Sumner Fit Kit 2 - 12" Provides Everything the Pipe Fitter Needs, Complete with Weldbox 3617 for Storage
Includes: Four (4) Fold-A-Jacks, a 2-6" Ultra Clamp, a 5-12" Ultra Clamp, a 2-6" Ultra Fit, a 5-12" Ultra Fit, a 2-4" Internal Fit-up Clamp, a 4-8" Internal Fit-Up Clamp, a 8-12" Internal Fit-Up Clamp, a Quad Level, a Steel Square, a Set of Qwik Pins and a Weldbox 3617 for Storage

A Compact Pipe Fit-up Kit Containing Sumner's Most Commonly Used Fit-up Tools
Includes: 2-6" Ultra Clamp, 2-6" Ultra Fit, 4-8" Internal Fit-Up Clamp, One Set of Carbon Steel Flange Pins, a Quad Level and a Weldbox 2008 for Storage

Chain Extension for the Sumner* Hold Down Device

- 10 Ton Flange Splitter to Tackle the Tough Jobs
- Spreader Arms Adjust From 2-3/4" to 8-1/2" (70 mm to 215 mm)
- Spring Return, Single Action Cylinder
- Hardened Wedge for Safe Splitting
- Hand Pump and 6' (1.5 m) Hose Available as Accessories

The Sumner* Internal Fit-Up Clamp Is an Internal Pipe Alignment Tool That Can Be Used on All Standard Weld Neck and Slip-on Flanges

- Holds Angles at 45°, 90° and 135°
- Strong Magnets Allow for a Hands-free Hold
- Cabable of 48.5 lbs of Holding Force
- Available In 4 Options: Small, Medium, Large and Multiple Angle Fixtures

Use Magnetic Holders with a Standard Square to Create an Ideal Torch Guide - Sold in Packages of Three (3) - Holds Squares up to 1/8" (3 mm) Thick