Tools

Milwaukee - Diamond Coring Motor - 300/600 RPM - 20 Amp with Clutch - Built-In Water Swivel - Open End Wrench - Water Control Valve - Water Hose Adapter - 4.8 Max HP - Clutch Motor Protection - L5-20P Plug Type - 7"-14" / 4"-7" Suggested Dia in Med Aggregate

Includes:

(1) Diamond Coring Motor, 600/1200 RPM, 20 Amp with Clutch (4005)

(1) Built-In Water Swivel

(1) Water Control Valve

(1) Open End Wrench

(1) Water Hose Adapter

Includes:

(1) Diamond Coring Motor, 375/750 RPM, 15 Amp with Shear Pin (4090)

(1) Water Hose Adapter

(1) Water Control Valve

(1) Open End Wrench

(6) Extra Shear Pins

(1) Built-In Water Swivel

Includes:

(1) Diamond Coring Motor 450/900 RPM, 20 Amp with Shear Pin (4094)

(1) Built-In Water Swivel

(1) Water Control Valve

(6) Extra Shear Pins

(1) Open End Wrench

(1) Water Hose Adapter

Includes:

(1) Diamond Coring Motor 450/900 RPM, 20 Amp with Clutch (4096)

(1) Built-In Water Swivel

(1) Water Control Valve

(1) Open End Wrench

(1) Water Hose Adapter

Includes:

 (1) Diamond Coring Motor 500/1000 RPM, 15 Amp with Clutch (4097-20)

(1) Built-In Water Swivel

(1) Open End Wrench

(1) Water Control Valve

(1) Water Hose Adapter

Includes:

(1) Electromagnetic Drill Press Base, Fixed Position (4202)

Milwaukee - Electromagnetic Drill Press Base - Adjustable Position - Electronic Feedback - 11" Drill Travel

Includes:

(1) Electromagnetic Drill Press Base, Adjustable Position (4203)

(1) 1/2" Motor for Electromagnetic Drill Press (4253-1)

Includes:

(1) Electromagnetic Drill Press Base, Adjustable Position (4203)

(1) 3/4" Motor for Electromagnetic Drill Press (4262-1)

Includes:

(1) Electromagnetic Drill Press Base, Adjustable Position (4203)

(1) No. 3 MT Motor for Electromagnetic Drill Press (4297-1)

Includes:

(1) Electromagnetic Drill Press Base, Adjustable Position (4203)

(1) No. 3 MT Motor for Electromagnetic Drill Press (4292-1)

Includes:

(1) Electromagnetic Drill Press Base, Fixed Position (4202)

(1) 3/4" Motor for Electromagnetic Drill Press (4262-1)

Includes:

(1)12" Dual-Bevel Sliding Compound Miter Saw

(1) Blade Wrench

(1) Carbide Tipped Blade

(1) Dust Bag

INCLUDES:

(1) 1-Stage Wet/Dry Vacuum Cleaner (8950)

(1) 1 1/2" O.D. Hose Connections

(1) 7' x 1 1/2" I.D. Vinyl Hose

(1) Filter Cartridge

(3) Hold Down Clamps

(1) Hose Adapter

Milwaukee - 10 gal., 1-1/8 bu. recovery capacity, 6.2 amp motor - Positive water shut-off - Three Wheel Dolly - One-stage bypass motor for wet/dry operation - 45 Inch Sealed Suction in Water - 133 CFM Max Air Flow - 1 Stage Bypass Motor - Wet/Dry Material - 19-1/2" Width

Milwaukee - 21 gal., 2-1/4 bu. recovery capacity, 9.2 amp motor - Front drain valve with hose connector - Polyethylene tank resists rust and corrosive materials - Three-stage bypass motor for wet/dry operation - 134 Inch Sealed Suction in Water - 92 CFM Max Air Flow - 3 Stage Bypass Motor - Wet/Dry Material - 21" Width

The Rack-A-Tiers AC Splitter features a receptacle and GFCI tester as well as the ability to measure the current through the measuring rings. Verify your receptacle wiring, measure voltage and use your clamp meter (not included) to measure current up to 15A.

The AC Splitter is equipped with lights that show 5 different wiring faults: Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse.

Users are able to switch off the buzzer sound using the buzzer switch, Rated 120V/15A, Includes gator clamp adaptors, Includes incandescent bulb.

Please note: The bulb used on the tracer must not exceed 60W. LED’s cannot be used. 60W Incandescent bulbs can become hot when in use. Please use caution while handling them.