Inspection and Detection
-
Milwaukee 2200-20 - Voltage Detector
Includes:
(1) Voltage Detector (2200-20)
(2) AAA Batteries
(1) Test and Safety Instructions
Learn More...$22.73 -
Ideal Industries 61-025 - Volt Aware™ Non-Contact Voltage Tester
- Indicates presence of voltage from 40-1000VAC
- Visual indication of voltage
- Selectable audible indication of voltage
- Sleek, compact design ; Auto shut-off to conserve battery life
- Green LED shows unit is active, flashing red indicates live voltage
- Low battery detector ; Easy battery replacement ; Batteries included (2 AAA) Learn More...
$31.27 -
Ideal Industries 61-065 - Vol-Test Voltage Tester
- Extremely rugged and reliable
- Vibrates when AC voltage is present
- Indicates AC/DC voltage level
- Replaceable leads with shielded probe tips (IEC61010-031 compliant)
- Bright, long-life LED’s and neon indicator lamp
- Low impedance to eliminate ghost voltages
- Dual voltage indication for backup safety Learn More...
$104.49 -
Ideal Industries 61-070 - Test Leads For 61-065, 61-076
Ideal Industries 61-070 - Test Leads For 61-065, 61-076
Learn More...$46.47 -
Ideal Industries 61-076 - Vol-Con® Solenoid Voltage Tester
- Extremely rugged and reliable
- Vibrates when AC voltage is present
- Indicates AC/DC voltage level
- Replaceable leads with shielded probe tips (IEC61010-031 compliant)
- Bright, long-life LED™s and neon indicator lamp
- Dual voltage indication for backup safety Learn More...
$125.07 -
Ideal Industries 61-092 - Vol-Con® Elite Digital Voltage Tester w/Vibration Mode
- Tests for AC Voltage from 24-600VAC
- Tests for Dc Voltage from 6-220VDC
- Visual and audible warning ; Audible continuity
- Non-contact voltage indication (40-600VAC)
- Low impedance to eliminate ghost voltages
- Low battery indicator ; Integral lead storage
- Replaceable silicone test leads (IEC61010-031) Learn More...
$182.87 -
Ideal Industries 61-096 - Split-Jaw™ Smart Meter
Measures 0.9-200AAC, 1.3-750VAC, 2.1-1000VDC, 0.0-9999 - Audible continuity - Data hold - Integral lead storage - Replaceable test leads - Auto power off - Low battery indication - Test Leads IEC61010-031 compliant
Learn More...$210.48 -
Ideal Industries 61-520 - 3-Phase Sequence Tester
- For use up to 600V
- Color-coded insulators over alligator clips
- Shock resistant housing
- Easy to read Learn More...
$234.63 -
Ideal Industries 61-521 - 3-Phase/Motor Rotation Tester
- Identifies three-phase sequences
- Indicates motor rotation
- Checks for open phases
- For use up to 600V Learn More...
$301.57 -
Ideal Industries 61-547 - Voltage Indicator 8 Range AC/DC with Polarity Indicator
Ideal Industries 61-547 - Voltage Indicator 8 Range AC/DC with Polarity Indicator
Learn More...$25.95 -
Ideal Industries 61-557, Voltage & Continuity Tester w/LCD, GFCI, Flashlight & NCVT
- UL Certified CAT IV 600V, 0-600V AC/DC
- Measures AC/DC voltage, Low Impedance AC Voltage (Lo Z) (for ghost voltage dissipation), automatically identifies AC or DC voltage and determines DC polarity and Tests for Continuity and GFCI operation
- Large, easy to read LCD with integrated back light and flashlight for work in dark locations
- Industrial grip, probe holders and hanging strap clip increase productivity and durability
- Integral probe holders allow insertion of probes directly into outlet
- IP 42 Rated Learn More...
$52.21 -
Ideal Industries 61-627 - Non-Contact Voltage Tester Single Range 50 to 600V AC
- UL Certified CAT IV 600V AC, 50 to 600 V AC
- Auto Power Off - After 10 minutes of inactivity (no button pressed and no signals detected), the tester will emit one long beep (~0.5s) and then shut off. Note: if the flashlight is on, it will be also shut off.
- Low Battery Indication - If battery voltage is less than around 2.4V, the green led in the tip will flash 3 times and the buzzer will send out one long beep, then turn off the device. Learn More...
$12.76 -
Ideal Industries 61-637 - Non-Contact Voltage Tester Single Range 24 to 600V AC
Ideal Industries 61-637 - Non-Contact Voltage Tester Single Range 24 to 600V AC
Learn More...$16.33 -
Ideal Industries 61-647 - Non-Contact Voltage Tester Single Range 50 to 1000V AC
Ideal Industries 61-647 - Non-Contact Voltage Tester Single Range 50 to 1000V AC
Learn More...$26.53 -
Ideal Industries TLF-014 - 1000V CAT IV Custom Kit
- Unique finger-guard protects against accidental high voltage contact
- All-weather, double-skin silicone insulation with bi-coloured Wear-Guard Damage Control Indicator - a white layer below the red / black layer provides visual indication if cable becomes damaged
- EZ-Off caps over probe tips
- Molded, tug-resistant right-angle plugs (4mm) with strain reliefs fit standard meters
- Maximum Wire Gauge: 2 AWG ; Minimum Wire Gauge: 4 AWG
- Twist-On Style: Asst Learn More...
$184.22 -
Ideal Industries TL-797RP - Remote Probe
Checks new installation for damaged insulation - Checks existing installations and motor windings for breakdown in insulation - 2-year warranty
Learn More...$65.01 -
Ideal Industries TL-532A - Alligator Plug/Lighting Adaptor
Allows SureTest® Circuit Analyzer to analyze non-outlet based circuit for branch circuit safety and performance
Learn More...$11.41 -
-
Rack-A-Tiers 99000 - AC Sensor w/ Red Glow
Non-contact detection of 50-1000 VAC. Senses voltage without metallic contact. Includes 2 replaceble AAA alkaline batteries. Outstanding safety instrument.
Learn More...$40.99 -
Rack-A-Tiers 99001 - Ultimate AC Sensor w/ Red Glow & Audio Alert
Rack-A-Tiers 99001 - Ultimate AC Sensor w/ Red Glow & Audio Alert
Learn More...$44.99