Welding Tools & Pipe Fitting Products Products

The Sumner Ultra Qwik Clamp Is a Fast - Accurate Fit-up Tool For Pipe To Pipe - Pipe To Fitting And Other Fit-up Needs With a Quick Button Release
- Push Button Design Allows For Rapid Action Setting And Fine Tune Thread Adjustment
- Accurate Fit-up of 1" Through 2-1/2" (25 to 63.5 mm) Pipe
- Rugged Frame, Built For Jobsite Use
- Stainless Steel Contacts & Alignment Screws

The Sumner Ultra Qwik Clamp Is a Fast - Accurate Fit-up Tool For Pipe To Pipe - Pipe To Fitting And Other Fit-up Needs With a Quick Button Release
- Push Button Design Allows For Rapid Action Setting And Fine Tune Thread Adjustment
- Accurate Fit-up of 5" Through 12" (127 To 300 mm) Pipe
- Rugged Frame, Built For Jobsite Use
- Stainless Steel Alignment Screws

The Sumner Ultra Qwik Clamp Is a Fast - Accurate Fit-up Tool For Pipe To Pipe - Pipe To Fitting And Other Fit-up Needs With a Quick Button Release

The Sumner Ultra Fit Is a Fast - Accurate Fit-up Tool For Pipe To Pipe - Pipe To Fitting And Other Fit-up Needs.
- Accurate Fit-up of 5" Through 12" (127 To 300 mm) Pipe
- Rugged Frame, Built For Jobsite Use
- Stainless Steel Contacts & Alignment Screws
- Operating Handle Repositions For Close Work

The Sumner Angle Welding Fixture Accurately Positions Flat And Round Ferrous Metal For Welding And Assembly.
- Holds Angles at 30°, 45°, 60°, 75° And 90°
- Strong Magnets Allow For a Hands-free Hold
- Cabable of 48.5 lbs of Holding Force
- Available In 4 Options: Small, Medium, Large And Multiple Angle Fixtures

The Sumner Mul-t-square W/extended Blade Is a Tool That Consists Of Two 45 Degree Extended Blades That Slide Effortlessly In An Industrial-strength Plastic Handle.
- Lightweight Durable Alumnimum Construction
- Handles Up To 8" Flanges And Up To 14" Fittings
- Versatile For Measuring 45° And 90° Angle
- Blades Marked With Both Imperial And Metric Units
- Comes With 30" (76 cm) Arms

Sumner Chmr - Chipping Hammer's 10.5 Length Gives Good Leverage While Offering Excellent Balance and Control for Precise Chipping. Features Ergonomic Grip That Reduces Impact Vibration - Chisel Shaped End and a Wire Brush on The Other End - And a Solid - Lightweight Construction.

- Fixed Magnetic Arms Accommodate 4" To 8" Steel Pipe or Tank
- Push Button Spring-loaded Striking Hammer
- Removable Digital Leveling Gauge With Magnetic Base
- Alignment Marks for Centering
- Digital Gage Can Be Used as Angle Finder

Sumner*'s Aluminum 24" x 16" Standard Squares from  Marked with Both Imperial and Metric Units.

- Fits All Flanges for 5" Pipe and Larger With Bolt Holes 3/4" To 1-5/8" (19 To 42 mm)
- Used In Combination With The Adjust-A-Fit To Bring Pipe Flanges To Exact Plumb for Tack and Weld-out
- Handles Loads Up To 1,000 lb
- Flange Nuts Serve as Convenient Reference Points To Check Level

- Uses Gravity To Align Fittings for Loads Up To 45 Degrees
- Fastens Directly Onto Fittings for Loads Up To 1,000 lb
- Threaded Shaft Assembly Is Hardened for Long Tool Life
- Cloverleaf Setscrew and Threaded Shaft Handle Work From Either Side

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

- Toolless Install Pins Work as Convenient Reference Points To Level Flange for Tack and Weld-out
- Hardened Pins Automatically Center On 5/8" To 1-5/8" (16 To 42 mm) Holes
- Features Acme Threads for Maximum Clamping Power and Hardened Steel For Long-lasting Use

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

- Can Be Used For 150 lb To 1,500 lb Flanges
- Hardened Wedge For Safe Splitting
- Large Feed Screw
- Drive Can Be Rotated By 1-3/8" Wrench or 1/2" (12 mm) Bar
- Compact Design - Strong Enough For Touch Jobs

Sumner CSQ12 - 12" Combination Square Is a Professional Quality Tool with Accurate - High Contrast Black Precision-etched Scales That Are Easy To Read. Features a Corrosion Resistant Stainless Steel Blade and Convenient Brass Scoring Tool Housed In the Handle.

The Sumner Fit Kit 2 - 12" Provides Everything the Pipe Fitter Needs, Complete with Weldbox 3617 for Storage
Includes: Four (4) Fold-A-Jacks, a 2-6" Ultra Clamp, a 5-12" Ultra Clamp, a 2-6" Ultra Fit, a 5-12" Ultra Fit, a 2-4" Internal Fit-up Clamp, a 4-8" Internal Fit-Up Clamp, a 8-12" Internal Fit-Up Clamp, a Quad Level, a Steel Square, a Set of Qwik Pins and a Weldbox 3617 for Storage

A Compact Pipe Fit-up Kit Containing Sumner's Most Commonly Used Fit-up Tools
Includes: 2-6" Ultra Clamp, 2-6" Ultra Fit, 4-8" Internal Fit-Up Clamp, One Set of Carbon Steel Flange Pins, a Quad Level and a Weldbox 2008 for Storage