Wire Pulling

SIMpull™ Cable Guide System

Down Feed Adapter

Maxis Grips Group AA - 4 Standard Grips for 1/0 To 4/0
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group A - 4 Grips for 3/0 to 4/0 w/ RC114 in Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group B - 4 Grips for 250 to 350MCM W/ GPJ02 and RC158 In Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group C - 4 Grips for 400 to 500MCM w/ GPJ03 and RC158 in Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group D - 4 Grips for 600 to 750MCM w/ GPJ03 and RC158 in Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis® Grips™ , double lock system Complete Set-1/0 to 750MCM

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- One Person, 2 Minute Setup and Operate
- 2 Pulling Speeds: 25 fpm On Low (at No Load) and 100 fpm On High (at No Load)
- Quickly Adapts From Underground To Overhead Pulls
- No Need To Bolt To The Ground On Most Pulls
- 3,000 lbs. Peak Pulling Force

- Maxis 3K Cable Puller
- Milwaukee M18 Fuel Super Hawg 1/2" Right Angle Drill
- Milwaukee M18 Redlithium High Output HD12.0 Battery Pack
- W/ Rapid Charger
- Bracket for Cordless Drill

Maxis® 3K (with 1680-20 motor) - includes conduit adaptors 1" - 4" & PC100

- One Person, 2 Minute Setup and Operate
- 2 Pulling Speeds: 12 fpm on Low (at No Load) And 44 Fpm On High (at No Load)
- Quickly Adapts From Underground To Overhead Pulls
- No Need To Bolt To The Ground on Most Pulls
- 6,000 lbs. Peak Pulling Force
- Versatile, Can Adapt To Virtually Any Wire Pull
- Can Be Anchored To Most Trucks’ Standard 2” Receiver Hitch
- Able To Pull Up To 9 ft. of Wire Out of The Conduit
- Includes 5 Conduit Adapters 2” Through 4”, 5” and 6” Sold Separately

Maxis® 6K (with 1680-20 motor) - includes conduit adaptors 2" - 4" & PC100

Maxis® Cable Feeder

- High Strength Low Stretch
- Excellent Resistance To Uv Rays, Chemicals And Abrasions
- Factory Spliced Pulling Eye at Each End
- Polyester Double Braid