Wire Pulling

- High Strength Low Stretch
- Excellent Resistance To UV Rays, Chemicals And Abrasions
- Factory Spliced Pulling Eye at Each End
- Polyester Double Braid

- High Strength Low Stretch
- Excellent Resistance To UV Rays, Chemicals And Abrasions
- Factory Spliced Pulling Eye at Each End
- Polyester Double Braid

- High Strength Low Stretch
- Excellent Resistance To Uv Rays, Chemicals And Abrasions
- Factory Spliced Pulling Eye at Each End
- Polyester Double Braid

- High Strength Low Stretch
- Excellent Resistance To Uv Rays, Chemicals And Abrasions
- Factory Spliced Pulling Eye at Each End
- Polyester Double Braid

High Performance Pulling Rope Made From Ultra High Molecular Weight Polyethylene Fibers.
- 1/8” Qwikrope Can Easily Be Vaccumed Into Any Conduit Run Up To 290 ft
- 1/8” Pulling Rope With a Breaking Strength Of 1,100 lbs.
- Ultra Low Stretch, UV Resistant, Lightweight Pulling Rope
- 24% Reduction In The Coefficient of Friction, as Compared To Traditional Pulling Ropes
- Does Not Absorb Water, No Rope Rot

Low-friction polypropylene rope slides easily through conduit - Non-sliver surface can be handled without gloves - Will not rot or mildew - Rugged, lightweight construction - Tensile Strength: 7650 lbs

Low-friction polypropylene rope slides easily through conduit - Non-sliver surface can be handled without gloves - Will not rot or mildew - Rugged, lightweight construction - Tensile Strength: 7650 lbs

Low-friction polypropylene rope slides easily through conduit - Non-sliver surface can be handled without gloves - Will not rot or mildew - Rugged, lightweight construction - Tensile Strength: 7650 lbs

- High Strength Low Stretch
- Excellent Resistance To UV Rays, Chemicals And Abrasions
- Factory Spliced Pulling Eye at Each End
- Polyester Double Braid

- High Strength Low Stretch
- Excellent Resistance To UV Rays, Chemicals And Abrasions
- Factory Spliced Pulling Eye at Each End
- Polyester Double Braid

- Continuous Pulling up to 600 lbs.
- Lightweight and Portable
- One Person Setup and Operation
- Accepts Most Commercial 18V Cordless Drills
- Removable Capstan to Facilitate Polyline Removal
- Expandable Length up to 34.5 Inches
- Polyline Pin on Capstan to Prevent Slippage During The Pull
- Anodized for Corrosion Resistance
- Field Replaceable Chuck Adapter
- 600 lbs of Constant Pulling Force with 1000 lbs Peak Pulling Force

Maxis Grips Group D - 4 Grips for 600 to 750MCM w/ GPJ03 and RC158 in Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group C - 4 Grips for 400 to 500MCM w/ GPJ03 and RC158 in Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group A - 4 Grips for 3/0 to 4/0 w/ RC114 in Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group B - 4 Grips for 250 to 350MCM W/ GPJ02 and RC158 In Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

Maxis Grips Group AA - 4 Standard Grips for 1/0 To 4/0
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

- One Person, 2 Minute Setup and Operate
- 2 Pulling Speeds: 12 fpm on Low (at No Load) And 44 Fpm On High (at No Load)
- Quickly Adapts From Underground To Overhead Pulls
- No Need To Bolt To The Ground on Most Pulls
- 6,000 lbs. Peak Pulling Force
- Versatile, Can Adapt To Virtually Any Wire Pull
- Can Be Anchored To Most Trucks’ Standard 2” Receiver Hitch
- Able To Pull Up To 9 ft. of Wire Out of The Conduit
- Includes 5 Conduit Adapters 2” Through 4”, 5” and 6” Sold Separately

- Maxis 3K Cable Puller
- Milwaukee M18 Fuel Super Hawg 1/2" Right Angle Drill
- Milwaukee M18 Redlithium High Output HD12.0 Battery Pack
- W/ Rapid Charger
- Bracket for Cordless Drill

- One Person, 2 Minute Setup and Operate
- 2 Pulling Speeds: 25 fpm On Low (at No Load) and 100 fpm On High (at No Load)
- Quickly Adapts From Underground To Overhead Pulls
- No Need To Bolt To The Ground On Most Pulls
- 3,000 lbs. Peak Pulling Force