Wire Pulling

250 AWG SIMpull Head Pulling Device 30"

250 AWG SIMpull Head Pulling Device 24"

250 AWG SIMpull Head Pulling Device 18"

- 1,650 lb Rated
- One Piece Contruction
- Allows for Extension of Two Lengths of Rope

- 11,250 lb Rated
- One Piece Contruction
- Allows for Extension of Two Lengths of Rope

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- Assist In Guiding Cable Into Ducts, Conduit, And Manholes
- Reduces Cable Scuffing on The Edge of Duct, Conduit, And Manholes
- Sheave Rotates Which Helps Reduce Pulling Tensions
- Creates Large Bend Angle For Feeding And Pulling Cable
- Protects Side Wall Pressure When Pullling Out of Ducts
- Hook Hanger Further Reduces Pulling Weight of Cable By Distributing Force of Pull To An Auxillary Line

- Continuous Pulling up to 600 lbs.
- Lightweight and Portable
- One Person Setup and Operation
- Accepts Most Commercial 18V Cordless Drills
- Removable Capstan to Facilitate Polyline Removal
- Expandable Length up to 34.5 Inches
- Polyline Pin on Capstan to Prevent Slippage During The Pull
- Anodized for Corrosion Resistance
- Field Replaceable Chuck Adapter
- 600 lbs of Constant Pulling Force with 1000 lbs Peak Pulling Force

Maxis Grips Group D - 4 Grips for 600 to 750MCM w/ GPJ03 and RC158 in Carrying Bag
- Double Lock System
- Each Double Lock Maxis Grips Head Rated at 4000 lbs.
- Holds Securely To NO-LUBE Wire
- Disconnect Wire From Pulling Heads In 2 Minutes Without Cutting The Wire
- Keeps Pulling Head Tight for Easier Movement Through Conduit

1000 AWG SIMpull Head Pulling Device 15"

1000 AWG SIMpull Head Pulling Device 21"

1000 AWG SIMpull Head Pulling Device 27"

250 AWG SIMpull Head Pulling Device 12"

2 AWG SIMpull Head Pulling Device 6"

2 AWG SIMpull Head Pulling Device 30"

2 AWG SIMpull Head Pulling Device 24"

2 AWG SIMpull Head Pulling Device 18"