Additional Information
Stock Code | TFX2 LED 50K MVOLT YK DDBXD |
---|---|
Brand | Lithonia Lighting |
Family | LED Floodlight |
Fixture Type | Outdoor |
Voltage (V) | 120-277 V |
Wattage (w) | 94W |
Bulb Type | LED |
Lumens (Initial) | 13200 Lumens |
CRI | >70 |
Color Temperature (K) | 5000K Natural Light |
Incandescent Equal (W) | 250W Metal Halide |
Finish | Dark Bronze |
Power Factor | >90% |
THD: | <20% |
Mounting | Yoke |
UPC | 193048041552 |
Type | Floodlight |
Life Hours | 100,000 hrs |
UL Listed | UL , IP66 Rated , Wet location listed |
Warranty | 5-year limited warranty |
Is DLC Approved | Yes |
TFX2 LED Floodlight
Introduction
The TFX LED flood luminaire is a cost-effective, energy-efficient, long-life solution for replacing metal halide or HPS floodlights. Delivering 13,200 lumens, the TFX2 can replace up to 250W metal halide while saving up to 85% in energy costs. Reliable IP66 construction and excellent LED lumen maintenance will ensure a long service life; avoiding the multiple lamp changes of the metal halide luminaires they replace.
The TFX2 is available with integral slip fitter and yoke mounting options. The slip fitter can be used for installation on 2 3/8 inch outer diameter tenons.
FEATURES & SPECIFICATIONS
INTENDED USE
The TFX2 LED floodlight is designed to provide a cost effective, energy-efficient solution for the one-for-one replacement of existing metal halide or high pressure sodium lighting. The TFX2 is ideal for replacing up to 250W HID luminaires in parking lots, signage, yards, and other floodlighting applications. TFX luminaires deliver a uniform, wide flood distribution.
CONSTRUCTION
The TFX2 LED floodlight features a die-cast aluminum main body with optimal thermal management that both enhances LED efficacy and extends component life. The light engines and housing are IP66 rated, and sealed against moisture or environmental contaminants.
ELECTRICAL
Light engine(s) configurations consist of high-efficacy LEDs and LED lumen maintenance is L90/100,00 hours. Color temperature (CCT) is 4000K with minimum CRI of 70. Electronic drivers ensure system power factor >90% and THD <20%. All luminaires have 6kV surge protection.
INSTALLATION
The integral slip fitter option (IS) mates with standard 2 3/8” tenons for pole-top mounting. The yoke mount (YK) option allows mounting to solid surfaces and has a 30” SO cord. TFX luminaires are suitable for aiming in any orientation. TFX is rated for installation on ground. Can be tilted from 0° horizontal facing downwards, up to 180° horizontal facing upwards.
LISTINGS
UL Certified to meet U.S. and Canadian standards. Suitable for wet locations. IP66 Rated.
WARRANTY
5-year limited warranty.
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.