Additional Information
Stock Code | TL602E 60W 120 12AC WH |
---|---|
Brand | Juno Lighting |
Length (in) | 5 1/2'' |
Width (in) | 1-1/2'' |
Height (in) | 1-1/16'' |
Voltage (V) | 120 Volt |
Input Current | 0.56A |
Wattage (w) | 2-60 Watts |
UPC | 661209296887 |
Finish | White |
Power Factor | >0.90 |
THD: | <30% |
UL Listed | cULus, CSA |
PRODUCT SPECIFICATIONS
Description
TL602E 60W: 12V-60VA Class 2 electronic Driver/Transformer
• IC rated for recessed applications and can be buried in insulation
• Rated for 2W-60W watts total load
• 120VAC input
• Ideally suited for driving Juno Mini LED Downlight/Gimbal and Solo-Task fixtures
• May also be used to operate other low wattage LED or incandescent loads.
Note: Other TL602E driver/transformer wattages up to 60W are available via special order — consult factory for pricing and availability.
Construction
• 18 gauge die formed steel housing
• Low-profile, 1” overall height
• Available in standard direct-wire and optional 6’ 3-wire cord & plug version
• Terminal block provided for direct wire inputs accepts 18-12 AWG
• All versions provided with terminal block on output side for quick and secure fixture wiring (Type CL2 or NEC equivalent 18-12 AWG)
• Direct-wire versions supplied with die-cast fitting for 3/8” flexible metal conduit
• White polyester powder coat paint finish.
Dimming
• May be dimmed using only dimmers that have been tested and qualified by Juno for use with Juno LED fixtures; reference the following pages for dimmer compatibility
• Consult factory to confirm compatibility of other dimmers prior to installation with Juno LED fixtures.
Installation
• Transformer should be located within 4’ of first fixture in run
• To avoid excessive voltage drop in light output, make sure the fixture voltage at the last fixture is at least 10 volts
• Fully loaded run lengths longer than 18’ with 12 AWG is not recommended due to voltage drop
• Terminal block wiring connections for simpler, faster installation
• Provision for ground wire attachment
• Two 1/2” #6 wood screws provided for mounting to wood surfaces
• IC rated for use in insulated or non-insulated applications.
Labels
cULus Listed for use in the U.S. (UL 2108) and Canada (CSA C22.2 No. 250.0) • Suitable for damp locations.