Additional Information
Brochures & Specific Sheets
| Stock Code | Viscor_EV248-T832N120-K1X7 |
|---|---|
| Brand | Visioneering |
| Family | Specification-Grade Dust And Water Resistant Glass-Reinforced Polyester Gasketed Luminaire (IP65) |
| Part No | EV248-T832N120-K1X7 |
| Fixture Type | Indoor/Outdoor |
| Voltage (V) | 120 |
| Wattage (w) | 64 |
| Amperage | 0.53 Amps |
| Bulb Shape | T8 Straight Tube |
| Bulb Type | Fluorescent Lamps |
| Base Type | Medium Bi-Pin (G13) |
| How Many Lamps | 2 Lamp |
| Lumens (Initial) | 5,900 |
| Length (in) | 50 1/2" |
| Width (in) | 6 1/4" |
| Height (in) | 4 7/16" |
| Ballast Type: | Electronic Ballast |
| Start Method: | Instant Start |
| Housing | Lightweight, impact-resistant glass reinforced polyester housing. |
| Lens: | Standard diffuser is high-impact acrylic with textured pattern designed for high-efficiency while providing reduced glare.Smooth surface faces outwards. |
| Sold Separately: | Fluorescent Tubes |
| UL Listed | CSA, UL listed |
| Case Quantity | 1 |
| Notes | For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 101 or send email to cs@bulbspro.com |
EV - Eight Vapour
Specification-Grade Dust And Water Resistant Glass-Reinforced Polyester Gasketed Luminaire (IP65)
ProductSpecifications - Application Features
Specification-grade enclosed and gasketed IP65 luminaire. For use with indoor and outdoor applications where high-efficiency, high-performance and dust/water resistance is required. This luminaire's glass reinforced polyester housing and acrylic lens makes it ideal for applications that require a high degree of ingress protection. Captive, corrosion resistant latches made of polyamide (PA) retain diffuser.
ProductFeatures
- IP65 - Ingress Protection Rating
- Suitable for indoor or outdoor applications
- Dust and water resistant
- Continuous poured in-place gasket
- Shallow and narrow design
- Lightweight, glass reinforced polyester and resin housing
- Available with 1, 2 or 3 lamps
- High-impact acrylic DR diffuser held with captive, corrosion resistant latches
- Available in T5 and T8 configurations
Options&Adders
- Lamps available (please specify colour temperature and wattage)
- Enhanced specular aluminum reflector with a minimum reflectance of 95%
- Multi-level switching
- Dimmable ballast
- Emergency ballast
- Radio interference filter (120V - 277V)
- Clear, textured polycarbonate lens with linear ribs
- Liquid tight strain relief cord connector
- Stainless steel latches
- Chain sets
Applications
- Canopies
- Cold Storage Facilities
- Indoor Equestrian Facility
- Garage & Workshops
- Parking Garages
- Dusty & Wet Environments
$133.10
|
$152.64
|
$204.75
|
$187.02
|
$229.23
|
$130.96
|
$99.00
|
$201.67
|
