Additional Information
| Stock Code | VTS4-LS3-W/50K |
|---|---|
| Brand | Stanpro Lighting |
| Family | LED Vapour Proofs |
| Fixture Type | Indoor/Outdoor |
| Voltage (V) | 120-277 Volt |
| Wattage (w) | 40 Watt |
| Bulb Type | LED |
| Lumens (Initial) | 5200 Lumens |
| CRI | 80+ |
| Color Temperature (K) | 5000K Natural Light |
| Bulb(s) Included: | Yes |
| Power Factor | 0.95 |
| THD: | 7.61% |
| Dimmable | Yes |
| IP Rating | IP66 |
| Lens: | The UV stabilized frosted polycarbonate lens with LED diffusing pigment is impervious to rust or rot and is unaffected by extreme temperatures. |
| Weight (lb.) | 8 lbs |
| UPC | 8740460019106 |
| Start Temp. (Min) | -20°C |
| Start Temp. (Max) | +35°C |
| UL Listed | cULus Listed |
| Warranty | 5 Years Warranty |
| Case Quantity | 1 |
| Is DLC Approved | Yes |
| Notes | For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 102 or send email to cs@bulbspro.com |
VTS4-L
COMPACT LED VAPOUR TIGHT LINEAR FIXTURE
Economical contractor select for demanding environments
A luminaire ideal for a variety of applications where moisture and/or dust may be present. Installed either indoors or outdoors, the VTS4-L provides superior light distribution. This corrosion proof, enclosed gasketed IP66 luminaire has a narrow footprint and can be installed in demanding environments where high-efficiency is required.
APPLICATIONS:
• Industrial, commercial, residential, dusty, wet or damp environments
• Parking garages
• Subways
• Stairwells
• Elevator shafts
• Road Tunnels
• Schools
• Canopies
• Sporting applications
• Garden centers
• Storage rooms
• Airports
FEATURES AND SPECIFICATIONS
• Construction
Housing
− A narrow, lightweight, flexible and durable polycarbonate construction makes the luminaire vandal resistant and highly impact resistant
− The housing is sealed with a uniform gasket that blocks the ingress of moisture and dust and reinforced snap clips lock the luminaire together
− The UV stabilized polycarbonate housing is impervious to rust or rot and is unaffected by extreme temperatures.
− Sealed strain relief/cable gland kit included power connection is easily accomplished through pre-drilled hole at one end of the housing that comes
populated with a wet location watertight gland
− Precision molded preformed knockout at other end of the luminaire allowing for row mounting
Lens
The UV stabilized frosted polycarbonate lens with LED diffusing pigment is impervious to rust or rot and is unaffected by extreme temperatures
• Specifications
Colour consistency (SDCM) is 4 step MacAdam ellipse
Driver
− 120-277V and 347V available
− 0-10V dimming standard
Ambient temperature
-20°C to +35°C
Built in surge protection
Protection against short circuit and open circuit, inrush current complies with NEMA 410, transient protector complies with IEEE C62.41, 2.5kV/2.5kV.
Installation and Hardware
Standard Stainless steel mounting hardware for wall, ceiling and brackets for suspended mounting.
• Compliances
− Wet location
− IP66
− IK08 rating offering protection against 5 joules impact. Equivalent to impact of 1.7kg mass dropped from 295mm above impacted surface
− Meets requirements of ICES-005 issue 4 for class A products
− DLC standard for indoor luminaires, for primary use in direct linear ambient general applications
− cULus Certified
$4.80
|
$248.24
|
$128.42
|
$5.99
|
$96.24
|
$5.87
|
$115.00
|
$125.00
|
$68.74
As low as:
$60.49
|
$5.99
|
$59.24
|
$335.12
|
$96.84
|
$210.75
|
$106.18
|
