Additional Information
Stock Code | WF4 SQ B LED 30K40K50K 90CRI MW M6 |
---|---|
Brand | Lithonia Lighting |
Voltage (V) | 120V |
Wattage (w) | 9.2W/9W/9.3W |
Bulb Type | LED |
Lumens (Initial) | 560/620/600 Lumens |
CRI | 90 |
Color Temperature (K) | 3000K//4000K/5000K |
Incandescent Equal (W) | 65W |
Height (in) | 1.1'' |
Finish | Matte White |
Power Factor | > 0.9 |
Dimmable | Yes |
UPC | 191848267356 |
Start Temp. (Min) | -40°F (-40°C) |
Start Temp. (Max) | +104°F (+40°C) |
UL Listed | CSA |
Warranty | 5-year limited warranty |
FEATURES & SPECIFICATIONS
INTENDED USE — The 4" Wafer™ LED Square Downlight with Switchable White provides high-quality light output and efficiency featuring a switch for easy color temperature adjustment - while eliminating the need for recessed housings. The innovative, slim design allows for easy retrofit, remodel or new construction installation from below the ceiling. The Wafer LED downlight is wet location listed – making it ideal for use in a breadth of outdoor residential, hospitality, commercial and multifamily applications.
CONSTRUCTION — Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. FT4 plenum rated cable connector to connect from module to remote driver box. IC rated driver with convenience and
value of two remote selectable color temperature options, each with a setting choice to chose either 2700K, 3000K, and 3500K or 3000K, 4000K, and 5000K using the switch. The isolated driver integrated inside steel
remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly.
INSTALLATION — Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy installation. 4" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4 1/4 inches for this product. Suitable for installation in t-grid and drop ceiling applications. 3" plenum space required forinstallation of the remote driver box.
OPTICS — Edge-lit LED technology uses light guided plate to distribute light. Polycarbonate lens provides even illumination throughout the space.
ELECTRICAL — Connect directly to 120V power supply via provided UL recognized driver. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% with most standard incandescent dimers (see list of approved dimmers). Replaces 65W incandescent.