Juno Lighting WF6C ADJ TUWH MW M6 - 6'' LED Tunable White Adjustable Smart Wafer Downlight - Round - 2700K-5000K - Matte White

Product Features
The Smart Adjustable Wafer with Tunable White CCT’s is the perfect way to get connected with a Smart Home Lighting solution. Once commissioned, it can be controlled through an app or voice commands. Connect the Smart Adjustable Wafer directly to any Apple or Android phone using Bluetooth or Zigbee. Commission through the SmartThings app or Alexa and Google voice assistant apps.
Once installed, controlling the lighting from your mobile device is simple and easy to customize lighting from on/off, fine-tuning the color temperatures (2700K to 5000K), dimming to set the mood, and grouping to control an entire lighting application at once.

Applications
• Residential and commercial applications including multi-family, hospitality, assisted living, dormitories and other multi-level construction
• Shallow plenum, new construction
• IC rated - for direct contact with insulation

Specifications

Housing
Aluminum die cast outer frame, durable, powder coat paint to prevent rust
• Polycarbonate lens provides even illumination throughout the space lens can be tilt up to 20 degrees and can be rotated up to 180 degrees
• FT4 3-pin plenum rated cable connector to connect from module to remote driver box
• Steel spring clip for easy installation. 4" or 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4 1/4 inches (WF4C) or 6 1/4 inches (WF6C) for this product
• Can be installed from 3/8" to 1 ½" ceiling thickness
• Can be removed from below the ceiling for service or replacement.

LED Light Engine
LEDs are integrated to one piece high purity aluminum, thermally conductive housing to provide uninterrupted heat transfer to ensure long life of the LED
• Tunable color temperature from 2700K to 5000K
• 90 CRI minimum
• Dimmable to 1%. Not for use with Wall Dimmers.

Driver
Dedicated 120 volt replaceable driver
• Accommodates 120 volts AC at 50/60Hz
• Isolated driver integrated inside steel remote box with four 7/8” knockouts with slots for pryout
• Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductor or (4) 12 gauge insulated conductors, making the Regressed Wafer much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly
• Designed to provide 50,000 hours of life
• 3-year warranty on LED components.

Optical System
Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs
• Efficient system that can produce over 785 lumens while using 10.8W (WF4C) or 1175 lumens while using 14.0W (WF6C)
• Replaces 65W or 75W incandescent.

Life
Rated for 50,000 hours at 70% lumen maintenance.

Labels
CSA certified to US and Canadian safety standards
• ENERGY STAR®certified product
• Suitable for wet location
• Air-Loc certified in accordance with ASTM E283-2004
• NOM Certified
• Can be used to comply with California Title 24 Part 6 High Efficacy LED light Source Requirements.

Testing
All reports are based on published industry procedures; field performance may differ from laboratory performance.