Juno Lighting WF6C REG TUWH MW M6 - 6'' LED Tunable White Regressed Smart Wafer Downlight - Round - 2700K-5000K - Matte White

The Smart Regressed Wafer with Tunable White CCT’s is the perfect way to get connected with a Smart Home Lighting solution. Once commissioned, it can be controlled through an app or voice commands. Connect the Smart Regressed Wafer directly to any Apple or Android phone using Bluetooth or Zigbee. Commission through the SmartThings app or Alexa and Google voice assistant apps. Once installed, controlling the lighting from your mobile device is simple and easy to customize lighting from on/off, fine-tuning the color temperatures (2700K to 5000K), dimming to set the mood, and grouping to control an entire lighting application at once.

Features
- Regressed lens and baffle trim design to reduce glare for comfortable and even illumination
- Canless - no can required; equals easy to install and less labor
- Installs into wood joists or suspended ceilings with new construction pan
- Residential and commercial applications including multi-family, hospitality, assisted living, dormitories and other multi-level construction
- Dimmable to 1%. Not for use with Wall Dimmers

Specifications

Housing
Die cast aluminum mounting frame with integral polycarbonate flange
• Non-conductive dead-front trim design suitable for a wide range of applications and codes requiring a non-conductive lens
• Lens regressed to .5" with baffle trim design to reduce glare for comfortable and even illumination
• FT4 3-pin plenum rated cable connector to connect from module to remote driver box
• Steel spring clip for easy installation. 4" or 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4 1/4 inches (WF4C) or 6 1/4 inches (WF6C) for this product
• Can be installed from 3/8" to 1 ½" ceiling thickness • Can be removed from below the ceiling for service or replacement.

LED Light Engine
LEDs are integrated to one piece high purity aluminum, thermally conductive housing to provide uninterrupted heat transfer to ensure long life of the LED
• Tunable color temperature from 2700K to 5000K
• 90 CRI minimum
• Dimmable to 1%. Not for use with Wall Dimmers.

Driver
Dedicated 120 volt replaceable driver
• Accommodates 120 volts AC at 50/60Hz
• Isolated driver integrated inside steel remote box with four 7/8” knockouts with slots for pryout
• Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductor or (4) 12 gauge insulated conductors, making the Regressed Wafer much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly
• Designed to provide 50,000 hours of life
• 3-year warranty on LED components.

Optical System
Computer-optimized reflector design with high reflectance white finish coupled with a high transmission diffusing lens conceals the LEDs
• Efficient system that can produce over 650 lumens while using 9W (WF4C) or 950 lumens while using 13W (WF6C)
• Replaces 65W or 75W incandescent.

Labels
CSA certified to US and Canadian safety standards
• ENERGY STAR®certified product
• Suitable for wet location
• Air-Loc certified in accordance with ASTM E283-2004
• NOM Certified
• Can be used to comply with California Title 24 Part 6 High Efficacy LED light Source Requirements.

Testing
All reports are based on published industry procedures; field performance may differ from laboratory performance.