Additional Information
| Stock Code | ZL1F L48 4500LM MDD MVOLT 40K 80CRI WH |
|---|---|
| Brand | Lithonia Lighting |
| Voltage (V) | 120-277V |
| Wattage (w) | 39W |
| Bulb Type | LED |
| Lumens (Initial) | 4500 Lumens |
| CRI | 80 CRI |
| Color Temperature (K) | 4000K Cool White |
| Diameter (in) | 48.03'' |
| Length (in) | 2.85'' |
| Width (in) | 3.36'' |
| Finish | White |
| Dimmable | Yes |
| UPC | 190887815436 |
| Start Temp. (Min) | -4°F (-20°C) |
| Start Temp. (Max) | 86°F (30°C) |
| UL Listed | CSA, Damp Location |
| Warranty | 5-year limited warranty |
| Notes | Comparable Light Source: 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID |
Specifications
INTENDED USE:
Built on the compact, low-profile Z strip channel, this LED strip offers long maintenance-free life, several color temperatures, lumen outputs and lengths. Ideal for new construction and retrofit applications in T8 lengths. Ideal for use in commercial, retail, office, warehouse, and display applications. Certain airborne contaminants can diminish the integrity of acrylic and /or polycarbonate.
CONSTRUCTION:
Compact-design channel and cover are formed from code-gauge cold-rolled steel. Easy to install six-point row aligner included for continuous row mounting.
Finish: Paint options include high-gloss, baked white enamel (WH), galvanized (GALV), matte black (MB) and smoke gray (SKGY). After fabrication, five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance.
OPTICS:
Replaceable diffuse lens eliminates pixelation and offers ingress protection from debris.
ELECTRICAL:
Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-running operation. Optional internal pluggable wiring harness for reduced labor cost in row mounting applications (see PLR_ ordering information). Electronic LED driver is rated for 75 input watts maximum (see Operational Data on page 3 for actual wattage consumption), multi-volt input and 0-10V dimming standard. This fixture is designed to withstand a maximum line surge of 1.5KV AT 0.75KA combination wave for indoor locations, for applications requiring higher level of protection additional surge protection must be provided.
LEDs provide nominal 80CRI or 90CRI at 3000 K, 3500 K, 4000 K or 5000 K.
Lumen output up to 1,500 lumens per foot. Luminaire should be installed in applications where ambient temperatures do not exceed 86°F (30°C).
INSTALLATION:
Fixture may be surface mounted (with or without ZSPRG hanger), pendant or stem mounted with appropriate mounting options. Six-point aligner locks in place for easy continuous row mounting.
LISTINGS:
CSA certified to US and Canadian safety standards. For use in damp locations between -4°F (-20°C) and 86°F (30°C).
WARRANTY:
5-year limited warranty.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
$114.25
|
$401.92
|
$107.55
|
$226.80
|
$247.69
|
$55.04
|
$113.85
|
$252.57
|
