Additional Information
| Stock Code | 31SCM50 |
|---|---|
| Brand | Lovato |
| UPC | 8013975099629 |
| UL Listed | EAC |
| Notes | HS Code: 85364110 |
General characteristics
SN1 SINGLE POLE PROBES
A single pole probe used for level control in wells or storage tanks. It comprises of an AISI 303 stainless steel electrode, a plastic (PPOX) holder and a cable gland.
A seal ring and the tightening of the cable gland PG7 prevent water from entering the cable terminal connector and causing its oxidation.
Cable connection: screw.
The external cable diameter must be 2.5 to 6mm/Ø0.1 to 0.24” to warrant perfect sealing.
Maximum connection cable section: 2.5mm2.
Maximum operating temperature: +60°C.
Application: Tanks and deep wells.
SCM… PROBES
A single pole probe used for level control on boilers, autoclaves and in general where pressure (10 bar maximum) and high temperature (+100°C maximum) are present. It comprises of an AISI 303 stainless steel electrode embedded in an aluminium oxide body and a 3/8” GAS threaded metal support holder.
Cable connection: Threaded rod with nut.
Application: Tanks, pressurised tanks and boilers.
CGL125… PROBES
A single pole probe with AISI 302 electrode, used for level control on boilers and autoclaves and in general wherever pressure is up to 10 bar maximum.
Maximum operating temperature: +180°C.
Threaded coupling: 3/8” GAS.
Cable connection: Threaded rod with nut.
Application: Tanks, pressurised tanks and boilers.
PS31 PROBE
A small electrode holder, complete with three AISI 304 stainless steel probes.
Particularly suited to small containers whenever pressure is maximum up to 2 bar.
Maximum operating temperature: +70°C.
Threaded coupling: 1/2” GAS.
Faston termination; related lugs supplied.
Application: Tanks and automatic dispensers.
PS3S ELECTRODE HOLDER
A thermoset resin electrode holder to be used with three probes (rods probes to be ordered separately) and complete with terminal cover.
Maximum operating temperature: +100°C.
2” GAS threaded coupling.
Cable connection: screw.
Application: tanks.
Certification and compliance
Certification obtained: EAC.
Compliant with standards: IEC/EN 60255-5.
$127.25
|
$18.83
|
$367.10
|
$147.47
|
$90.53
|
$242.71
|
$73.71
|
$77.90
|
