Conduit & Fittings

The Stanpro SPEXS & SPSRS series of C860 certified commercial, slim line steel combination signs are designed to provide the greatest flexibility in meeting emergency lighting needs. The clean, contemporary appearance of the sign is combined with the reliability and performance of an emergency lighting unit. Available with long-life, high brightness LEDs with energy efficient consumption as low as just 4.7w AC. Each sign is designed with a simple slide-out face/backplate for quick and easy installation and all backplates are stamped with a universal mounting pattern. Multiple conduit knockouts and a universal mounting canopy kit complete each model.

Steel Body LED SORTIE Combo, 120/347VAC Input, 2 Pieces of 2Watt Crisp White LED Heads, Self Powered with 6VDC 36W Battery, Over 4 Hours Duration Standalone Unit, Universal Face Plate, White Color, Universal Mouting, Stanpro SPSRS60360-2L-SORTE

* This item is temporarily out of stock. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/spsrs-2l.html

Stanpro SPSRS12-2L - LED SORTIE Combo - Steel - 120/347 Volt - 2 x 2.5W Crisp White LED heads - Self Powered 12VDC 72W Battery Capacity - Over 8 hours Duration Standalone Unit

Stanpro SPEXS-2L - LED Exit Combo - Steel - 120/347 Volt - 2 x 2W Crisp White LED heads - Self Powered 6VDC 36W Battery Capacity

Hard Wire LED Retrofit Kit, Red Color, 120VAC or 347VAC

Lithonia Lighting TWAC 100M 120/347 LPI CSA - Cutoff Mini Wallpack - 100W Metal Halide - Magnetic Ballast - 120/347V - 8500 Lumens - Dark Bronze - Lamp Included - CSA

LED-7310-35C-G3 - 7W G24d / G24-q / GX24-q Retrofit - Omni-directional Design - 120-347V - 949 Lumens - 3500K - Replaces Up To 32W 2 Pin - 80+ CRI

LED-7310-40C-G3 - 7W G24d / G24-q / GX24-q Retrofit - Omni-directional Design - 120-347V - 970 Lumens - 4000K - Replaces Up To 32W 2 Pin - 80+ CRI

LED-7310-27C-G3 - 7W G24d / G24-q / GX24-q Retrofit - Omni-directional Design - 120-347V - 890 Lumens - 2700K - Replaces Up To 32W 2 Pin - 80+ CRI

The B50-CAN can be used with most 17 - 215 W (2’ - 8’) T8, T9, T10 or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline and energy-saving. One- or two-lamp operation may be selected (see Table 1). It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts.

When AC power fails, the B50-CAN immediately switches to the emergency mode, operating either one or two lamps at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the B50-CAN automatically returns to the charging mode

Universal - 1110566CTC000C - 250 W - 120/347V - Metal Halide - M58 - High Intensity Discharge (HID) Ballasts

M98/M143 HX-HPF 120/347V Ballast - For One 70 Watt Metal Halide Lamp

HID Ballast - High Pressure Sodium F-Can - 150W S55 Lamp Wattage - HX-HPF - 120/347V

HID Ballast - High Pressure Sodium F-Can - 50W S68 Lamp Wattage - HX-HPF - 120/347V

Universal - 11210539CTC000C - 150 W - 120/347V - Metal Halide - M102 - High Intensity Discharge (HID) Ballasts

M139 HX-HPF 120/347V Ballast - For One 70 Watt Metal Halide Lamp

Universal - 1110564CTC000C - 175W - 120/347V - Metal Halide - M57 - High Intensity Discharge (HID) Ballasts

M110 HX-HPF 120/347V Ballast - For One 50 Watt Metal Halide Lamp

Universal - 11210606CTC000C - 100 W - 120/347V - Metal Halide - M90 - High Intensity Discharge (HID) Ballasts