Conduit & Fittings
-
Maple Armor FW562C - Two WIre Duct Detector - Side and Top Mounting - 24Vdc - ULC Listed
FW562C-A/B/C is equipped with a photoelectric smoke detector, the units will signal the presence of a dangerous amount of combustion product in the ventilation system. They are compatible with Maple Armor’s control panel model FW106, FW106C, FW106S, FW106SC. Learn More...
Call for price
Out of stock
-
Maple Armor FW129 - Remote LED Annunciator - Display Zone Events from Fire Alarm Control Panel - Dark Gray - 24Vdc
The FW129 is provided with 30 zones (2 LEDs + 1 button / zone) for alarm/ audible/trouble events display & control. It also comes with 35 zones (2 LEDs / zone) for alarm/audible/trouble events display. The control part of the annunciator provides information led (power, generic trouble, signal silence, ground fault) & audible on status. There are buttons to operate local buzzer silence, signal silence, lamp test and events reset. Learn More...
Call for price
Out of stock
-
Maple Armor FW123 - Remote Annunciator - Powered by Panel Auxiliary Output - Red Color - 24Vdc
FW123 has a 7” color 800×480 resolutions LCD, 6 auxiliary function keys, and 9 LED indicators making it the most intuitive fire-alarm user interface. In total, up to 110 annunciators or 110 panels can be connected to the FW106/FW106S FACP via CAN bus in Class B to form a fire emergency detection and notification network system. Learn More...
Call for price
Out of stock
-
Maple Armor FW357 XNU - External Network Unit - 24Vdc
The FW357 is a subassembly of the FW106 and FW106S FACP (Fire Alarm Control Panel). It provides 1 CAN bus terminals to communicate with panels and annunciators in a Network to form a fire emergency detection and notification network system. The address is set by the rotary switch on the front cover. The valid address is 1. Learn More...
Call for price
Out of stock
-
Maple Armor FW347 ROU - Relay Output Unit Supports 5 Dry Contact Relays - 24Vdc
FW347 is a subassembly for the FW106 FACP (Fire Alarm Control Panel). The ROU supports five dry contact relays: Alarm Relay, Supervisory Relay, Trouble Relay, Other Signal Relay, and Programmable Relay. The Relay contacts are in the C Form Style. The address is set by the rotary switch on the board. The valid address is 1. Learn More...
Call for price
Out of stock
-
Maple Armor FW337 Notification Output Unit - Support 2 Independent Notification Appliance Circuits - 24Vdc
FW337 is a subassembly for the FW106 FACP (Fire Alarm Control Panel). The NOU supports two independent notification appliance circuits. The circuit topology supports Class A or Class B wiring. The maximum current is 2A per NAC, for a maximum of 4A total per NOU. The address is set by the rotary switch on the board. The valid address range is 1~5. Learn More...
Call for price
Out of stock
-
Maple Armor FW327 Addressable Loop Unit - Supports Up to 252 Addressable Devices - 24Vdc
The module FW327 is a subassembly for the FW106/FW106S FACP (Fire Alarm Control Panel). The ALU supports one addressable loop circuit, which supports up to 252 addressable devices. It can initialize and operate all devices residing on the loop and it communicates all relevant devices and event information, such as alarms and troubles, to the System Central Processing Unit. (CPU). Learn More...
Call for price
Out of stock
-
Maple Armor FW201AMI - Advance Machine Interface - 7” LCD Module - 11 Silicone Buttons - One Buzzer - 24Vdc
The electronic card FW201 is a subassembly of models FW106 FACP. It integrates two PCBA cards, a 7” LCD module, 11 silicone buttons, and a buzzer. Learn More...
Call for price
Out of stock
