Lovato DMEM100 - ENERGY METER - SINGLE PHASE - NON EXPANDABLE - MECHANICAL METER WITH MECHANICAL DISPLAY - 32A DIRECT CONNECTION - 1U

General characteristics

The energy meters are instruments for energy consumption measurement in single-phase installations with direct connection.

Operational characteristics

DME M... (mechanical display)
– Rated supply voltage: 230VAC -20...+15%
– Direct connection
– 32A maximum current
– Active energy measurements
– Active energy accuracy: Class 1 (IEC/EN 62053-21)
– Mechanical meter with 6+1 digit count
– Flashing LED for consumption indication
– Static pulse output for DME M100 T1 only
– Modular DIN 43880 housing, 1 module
– Sealable terminal blocks, standard supplied
– IEC degree of protection: IP40 on front; IP20 at terminals.

DME D110T1–DME D110 T1–DME D115 T1– DME D120 T1–DME D121–DME D130

– Nominal supply voltage:
• 220…240VAC for DME D…T1
• 110…120AC for DME D…T1 A120

– Voltage range:
• 187…264VAC for DME D... T1
• 93…132VAC for DME D…T1 A120

– Direct connection

– Maximum current: 40A for DME D100 T1, DME D110 T1…, DME D115 T1; 63A for DME D120 T1 – DME D121 – DME D130

– Active energy measurement and accuracy: Class 1 (IEC/EN 62053-21)

– Reactive energy measurement and accuracy: Class 2 (IEC/EN 62053-23) except for DME D115 T1

– LCD meter : With 5+1 digit count for DME D100/110 T1…; backlight with 6+1 digit count for DME D115 T1, DME D120 T1, DME D121, DME D130

– Metrological LED with pulse emission for consumption indication

– Clearable partial energy measurement except for DME D100/110 T1…

– One output: Pulse for DME D100 T1; programmable static for all other types

– Built-in RS485 port for DME D121; compatible with Synergy

– Modular housing, 1 module for DME D100 T1, DME D110 T1; 2 module for all other types

– Sealable terminal blocks, standard supplied

– protection degree: IP40 on front; IP20 at terminals.

Synergy supervision and energy management software See Section 27.

EXM series expansion modules See Section 28, page 3.

Certifications and compliance

Certifications obtained: EAC; UL Listed, for USA and Canada (File E346886), as Electrical Process Control Equipment - Energy meters, for DME D... types.
Compliant with standards: IEC/EN 61326-1 for DME M... type; EN 50470-3, IEC/EN 61010-1, UL 61010-1, CSA C22.2 n°61010-1 for DME D... types.

Multi-measurements:
- Total and partial active energy
- Total and partial reactive energy
- Voltage
- Current
- Active and reactive power
- Power factor
- Frequency
- Total and partial hour counter
- Average active power (calculation on every last 15 minutes)
- Maximum demand.

Multi-measurements:
- Total and partial active energy
- Active power
- Average active power (calculation on every last 15 minutes)
- Maximum demand.