Additional Information
Brochures & Specific Sheets
| Stock Code | FW811 |
|---|---|
| Brand | Maple Armor |
| Family | Input Module |
| Voltage (V) | 15 to 28 VDC |
| Amperage | Standby Current 0.17mA, Alarm Current 0.79mA |
| Length (in) | 120mm |
| Width (in) | 120mm |
| Height (in) | 45mm |
| Mounting | FW800 / FW801 Base |
| Operates | Max. Line Impedance 25 Ohms, Max. Impedance for Grounding 6.6 K Ohms, Compatible EOLR FW421 (10K Ohms) |
| Wire Gauge | 18-12 AWG |
| Start Temp. (Min) | 32°F / 0°C |
| Start Temp. (Max) | 120°F / 49°C |
| UL Listed | UL, cUL listed |
| Notes | • Alarm Causing: An alarm causing input will produce an ALARM event. The device red LED will indicate the alarm condition by turning on steady. A return to the normal condition will be ignored and the device LED indicator will remain latched in the red alarm condition until a reset command has been received. • Supervisory/Trouble/Monitor Causing: By changing the FW811 input module functions from its attribute interface on FACP, it can be configured to be a supervisory, trouble, or monitor signal, which will produce aSUPERVISORY, TROUBLE, or MONITOR event. The device red LED will indicate the event condition by turning on steady. The supervisory and monitor are latched/non-latched selectable. A return to the normal condition will cause the event to disappear and the device LED indicator will return to the normal condition if the supervisory/monitor is nonlatched. A return to the normal condition will not cause the event to disappear and the device LED indicator will remain in event condition if the supervisory/monitor is latched. The trouble is non-latched. |
The FW811 is a UL/ULC listed device according to UL864 and ULC-S527 for Fire Protective Signaling Systems for indoor use and FM. The type of input contact is configurable.
Call for price
|
Call for price
|
Call for price
|
Call for price
|
Call for price
|
Call for price
|
Call for price
|
Call for price
|
