Safety
-
Edwards FX-10RF - Conventional Fire Alarm Control Panel - Red - 120VAC power source - 24VDC output
Conventional Fire Alarm Control Panel, Red - 10 Class B IDCs and 4 Class B NACs, 7.0A NAC power, (Pairs of IDCs and NACs convertible to single Class A circuits), 120VAC power source, 24VDC output, French Canada
Learn More...
$1,327.00 -
Edwards FSP302G - Fire Protection Equipment - Three Zone Non-coded With 3 Class B Initiating Device Circuit - 24VDC - 0.5A - Grey
Edwards FSP302G - Fire Protection Equipment - Three Zone Non-coded With 3 Class B Initiating Device Circuit - 24VDC - 0.5A - Grey
Learn More...
$542.00
-
Supco ETX - Metal Exhaust Tube - Duct Width up to 1ft
Metal exhaust tube - Duct width up to 1ft
Learn More...
$15.80 -
Supco A2440-00 - 1' Conduit Duct Accessory
Accessories add functionality to the duct smoke detection system by allowing quick, convienient inspections at eye level and effective audible and visual notification options
Learn More...
$16.11 -
Supco DST34 - Metal Sampling Tube - Duct Width 34 Inches
Metal sampling tube - Duct width 34 Inches
Learn More...
$23.97 -
Supco DST22 - Metal Sampling Tube - Duct width 22 Inches
Metal sampling tube - Duct width 22 Inches
Learn More...
$17.97 -
Supco DST2 - Metal Sampling Tube - Duct Width up to 2ft
Metal sampling tube - Duct width up to 2ft
Learn More...
$17.97 -
Supco DST2.5 - Metal Sampling Tube - Duct Width up to 2.5 feet
Metal sampling tube - Duct width up to 2.5 feet
Learn More...
$20.36 -
Supco DST10 - Metal Sampling Tube - Duct Width 8 to 12ft
Metal sampling tube - Duct width 8 to 12ft
Learn More...
$58.97 -
Supco DST1 - Metal Sampling Tube - Duct Width up to 1ft
Metal sampling tube - Duct width up to 1ft
Learn More...
$11.51 -
Supco RA100Z - Remote Annunciator - 18 to 32 VDC Intelligent - 3.1 to 32 VDC Conventional -12 mA
Remote annunciators are designed for both conventional and intelligent applications. Red LED provides visual indication of alarm condition
Learn More...
$38.61 -
Supco RTS151 - Remote Test Station Accessory - 14 to 18 AWG - 95% RH (Non-condensing) - 40 seconds max.
RTS151 remote test station is automatic fire detector accessory designed to test duct smoke detectors from a convenient location - 2.8 to 32 VDC, 12mA max. Alarm Power - 10VA @ 32 VDC Test/Reset Switches
Learn More...
$81.47 -
Supco RTS151KEY - Remote Test Station Accessory - 14 to 18 AWG - 95% RH (Non-condensing) - 40 seconds max.
RTS151KEY remote test station is automatic fire detector accessory designed to test duct smoke detectors from a convenient location - 2.8 to 32 VDC, 12mA max. Red - 14 to 35 VDC, 12mA max. Green
Learn More...
$120.25 -
Supco APA151 - Remote Annunciator - 12 to 18AWG - 30mA - 16 to 33 VDC - 10 to 93% RH (Non-condensing)
The APA151 piezo annunciator proivides an audible alarm signal, a red LED to indicate alarm status, and a green LED to indicate power status - For use with 4-wire conventional duct smoke detector applications
Learn More...
$68.02 -
Supco D4S - Low Flow Sensor Only Component - 100 to 4000 ft/min - 0 to 95% RH (Non-condensing)
Replacement Photoelectric Sensor
Learn More...
$209.62 -
Supco AOS - Add-On Strobe Accessory
Accessories add functionality to the duct smoke detection system by allowing quick, convienient inspections at eye level and effective audible and visual notification options
Learn More...
$100.63 -
Supco P48-21-00 - End Cap For Metal Sampling Tubes
Replacement end cap for metal sampling tubes
Learn More...
$8.18 -
Supco P2WK-P - Horn Strobe Outdoor White - 1 flash per second - 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal)
White or plastic housing - Weatherproof NEMA 4X (IP56) case - Field-selectable candela settings - Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela - Rotary switch for horn tone and three volume selections
Learn More...
$198.60 -
Supco SSM248 - Alarm Bell 8" 24VDC - 80 dB - -31°F to 140°F
Approved for indoor & outdoor use - Low current draw - High dB output - 8" diameter - 24 VDC Operating
Learn More...
$142.72 -
Supco MHW - Mini Horn White - 4.6"L x 2.9"W x .45"D - 12 to 18AWG - 12 to 24VDC - 10 to 93%RH Non-condensing
12 and 24 volt operation - High and low volume settings - Temporal and non-temporal tones - Mounts to single gang back box - Compatible with MDLsync module - Ceiling or wall mounting - 1W LED Flashlight - Red warning light - Strong, pivoting magnetic base - 100,000 hour LED life - Fold-away, swivel hook - 32°F to 120°F (0°C to 49°C) Operating
Learn More...
$36.86
