Additional Information
| Stock Code | WF4 ADJ SWW5 90CRI MW M6 |
|---|---|
| Brand | Juno Lighting |
| Part No | *279GLN |
| Voltage (V) | 120V, 60 Hz |
| Wattage (w) | 10W |
| Bulb Type | LED |
| Lumens (Initial) | 729 Lumens |
| CRI | 90 |
| Color Temperature (K) | 2700K/3000K/3500K/4000K/5000K |
| Incandescent Equal (W) | 65W |
| Diameter (in) | 5.3'' |
| Height (in) | 1.4'' |
| Finish | Matte White |
| Dimmable | Yes |
| UPC | 196183148025 |
| Start Temp. (Min) | -40°F (-40°C) |
| Life Hours | 50,000 Hours |
| UL Listed | cCSAus, Title 24, Wet Location |
| Warranty | 3-year limited warranty |
| Notes | For additional options and special quantity discounts, please contact our sales department 1-(855)-296-9508 x 102 or send email to cs@bulbspro.com |
The 4" adjustable wafer with 5CCT Switchable White technology provide high-quality light output and efficiency featuring a switch for easy color temperature adjustment to choose between 2700K, 3000K, 3500K, 4000K, or 5000K - while eliminating the need for recessed housings. The adjustable gimbal allows for up to 20 degrees of rotation making this version perfect for angled ceilings.
HOUSING:
Polycarbonate injection molded outer frame, with steel back plate. Non-conductive dead-front trim design suitable for a wide range of applications and codes requiring a non-conductive lens
• FT4 3-pin plenum rated cable connector to connect from module to remote driver box
• Steel spring clip for easy installation. 4" and 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4-1/4" for the WF4 and 6-1/4" for the WF6
• Can be installed from 3/8" to 1 ½" ceiling thickness
• Can be removed from below the ceiling for service or replacement.
LED LIGHT ENGINE:
Switchable white color temperature from 2700K, 3000K, 3500K, 4000K, 5000K
• 90 CRI minimum
• Color accuracy within 4 step McAdams Ellipse at the end CCT (2700K and 5000K), within 6 step McAdams Ellipse in the middle CCT (3000K, 3500K, and 4000K)
• Dimming 100% to 10% with most standard incandescent dimmers.
DRIVER:
Connect directly to 120V Class-2 (CAN ICES-005 (B) / NMB-005 (B)) LED driver. 120V 60 Hz constant current driver provides noise free operation
• IC rated driver with convenience of a switch to choose between 5 selectable color temperature options ranging from 2700K (warm white), 3000K, 3500K, 4000K, or 5000K (daylight)
• The isolated driver with integrated inside steel remote box has four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (6) 14 gauge insulated conductor, or (4) 12 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications
• 2" plenum space required for the installation of the WF6 driver box, and 3"plenum space required for the installation of the WF4 driver box
• Suitable for installation in t-grid and drop ceiling applications with universal new construction pan.
OPTICAL SYSTEM:
Edge-lit LED technology uses light guided plate to distribute light
• Polycarbonate lens provides even illumination throughout the space
• Efficient system that can produce over 729 lumens while using 10W (WF4) and 1007 lumens while using 12W (WF6)
• Replaces 65W incandescent (WF4) and 75W incandescent (WF6).
$39.84
|
$67.44
|
$58.40
As low as:
$52.56
|
$17.60
|
$8.08
|
Juno JPDZ4 DB - Low Profile 4" Canless LED Round Baffle Downlight - 120V - 90+ CRI - White Trim Ring
$57.60
|
$11.12
|
$73.52
|
