Additional Information
| Stock Code | WF4 SQ B LED 40K MW M6 |
|---|---|
| Brand | Lithonia Lighting |
| Fixture Type | Indoor/Outdoor |
| Voltage (V) | 120V |
| Wattage (w) | 10.28 W |
| Bulb Type | LED |
| Lumens (Initial) | 650 lumens |
| CRI | 80 |
| Color Temperature (K) | 4000K Cool White |
| Height (in) | 1.1'' |
| Finish | Matte White |
| Dimmable | Yes |
| Lens: | Polycarbonate |
| Mounting | Recessed |
| UPC | 190887706062 |
| Start Temp. (Min) | -40°C |
| Start Temp. (Max) | 40°C |
| Type | Downlight |
| Life Hours | 36,000 hours |
| UL Listed | CSA Listed |
| Warranty | 5-year limited warranty |
WF4
4" LED Module
FEATURES & SPECIFICATIONS
INTENDED USE — The 4" Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovative wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing. The LED module maintains at least 70% light output for 36,000 hours. These LED Wafer downlights are intended for closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas.
CONSTRUCTION — IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. Round fixture with integral edge-lit LED's. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (8) 14 gauge insulated conductors, or (6) 12 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly.
PATENT PENDING.
INSTALLATION — Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy installation. 4" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 4 1/4 inches for this product. Suitable for installation in t-grid and drop ceiling applications. 3" plenum space required for installation of the remote driver box.
OPTICS — Wafer-Thin downlight edge-lit LED technology uses light guided plate to distribute light. Polycarbonate lens provides even illumination throughout the space. Utilizes 2700K, 3000K, 3500K, 4000K, and 5000K color temperature LEDs.
ELECTRICAL — Connect directly to 120V power supply via provided UL recognized driver. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% (See page 2 for recommended dimmers). Standard input wattage is 9.6W, 70 lumens per watt. Replaces 50W incandescent.
LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® certified. Wet location. Air Tight certified in accordance with ASTM E283-2004. NOM Certified.
WARRANTY — 5-year limited warranty.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
$103.04
|
$103.04
|
$132.66
|
$37.40
|
$86.48
|
$37.40
|
$114.08
|
$36.24
|
