Ballast / Transformer

Philips Bodine B30ST - Emergency Ballast - 90 Min. - Operates (1) or (2) AC/DC Output for T5 or T8 lamps - 120-277 VAC - 50/60Hz - Emergency mode lumen output up to 3500 lumens - Two-wire illuminated test switch

The B94CGU can be used with one 18 - 42 W (4-pin) twin, quad or triple twin-tube compact. It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The B94CGU is suitable for indoor and damp locations.

When AC power fails, the B94CGU immediately switches to the emergency mode, operating one lamp at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp-life shutdown circuits.

B100 available only as as ELC (end-of-lamp-life compatible). One 17-215 W (2’- 8’) T8, T10 or T12 lamp or one (4-pin) long compact. Not recommended with reduced-wattage, energy-saving T8 lamps.

When AC power fails, the B100 immediately switches to the emergency mode, operating one lamp at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp-life shutdown circuits.

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 700 Lumens

Philips Bodine B30 - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8 Fluoresent Lamps - Universal Voltage 120-277V - Emergency mode lumen output up to 3500 lumens - Two-wire illuminated test switch

The B33 can be used with two or three 32 W (4’) T8 fluorescent lamps without integral starters. It is compatible ONLY with instant start, parallel two-, three- or four-lamp electronic or standard AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The B33 is suitable for indoor and damp locations.

When AC power fails, the B33 immediately switches to the emergency mode, operating either two or three lamps for a minimum of 90 minutes. When AC power is restored, the B33 automatically returns to the charging mode.

TCP - Emergency Ballast - 90 Min. - Operates (1) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 1300 Lumens

Philips Bodine B50 Cold-Pak - Emergency Ballast - 90 Min.  Cold Environment Applications -20°C to 55°C Temperature Rating One- or Two-lamp Operation - 120-277 VAC - 60Hz - Up to 1200 Lumens @ 25°C - Single Pole Test Switch