Ballast / Transformer

The B94CGU can be used with one 18 - 42 W (4-pin) twin, quad or triple twin-tube compact. It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The B94CGU is suitable for indoor and damp locations.

When AC power fails, the B94CGU immediately switches to the emergency mode, operating one lamp at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp-life shutdown circuits.

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 3000 Lumens

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 1400 Lumens

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 700 Lumens

TCP - Emergency Ballast - 90 Min. - Operates (1) T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 500 Lumens

TCP - Emergency Ballast - 90 Min. - Operates (1) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 800 Lumens

TCP - Emergency Ballast - 90 Min. - Operates (1) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 1300 Lumens

Philips Bodine B30 - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8 Fluoresent Lamps - Universal Voltage 120-277V - Emergency mode lumen output up to 3500 lumens - Two-wire illuminated test switch

Philips Bodine B30HV - Emergency Ballast - 90 Min. - Operates (1) or (2) T5HO High Bay Compatibility - 347-480 VAC - 50/60Hz - Emergency mode lumen output up to 3500 lumens - Two-wire illuminated test switch

Philips Bodine B30ST - Emergency Ballast - 90 Min. - Operates (1) or (2) AC/DC Output for T5 or T8 lamps - 120-277 VAC - 50/60Hz - Emergency mode lumen output up to 3500 lumens - Two-wire illuminated test switch

Philips Bodine B50ST - Emergency Ballast - Up to 1400 Lumens Output - One- or Two-lamp Operation - 120-277 VAC, 50/60 Hz - Single Pole Test Switch

Magnetic Ballasts for PL-7W, 9W, G23 lamp type, 1 lamp(s) at 1 x 7, 9 watts

* This item has been discontinued and the suggested replacement by the supplier is CF-9T-CC-TP, which is only works for 9 watts

LED driver - 12V constant voltage - 6W - with cord and plug

Satco S8000 - LED Emergency Driver - 5W - 120-277V - Red - 24 Hour Recharge Time - 1.8 Watt Standby Power - > 90 Minute Operation From Lithium Ion Battery - Switching Time < 1 Sec - Over-Charge / Discharge Protection - Self-Checking Function - Test Button

Constant Current LED Driver, Type: LED-CU3536-CC-8W, I/P: 100-240Vac, 50/60Hz, O/P: 3-36Vdc, 350mA, Model: LD-CU3536AF, Pout: 1-8W, Short Circuit & Overload Protected

6W LED/CDL EM Driver, 90 Minute, 100-277V Input, LED Emergency Backup Driver, For use Satco 4/6/8/10 Inch Commercial Down Light