Conduit & Fittings

LED-8016E40-A - 16.5W Rated Bollard Retrofit - 120-277V - 2000 Lumens - E26 Base - 4000K Cool White - Replaces Up To 125W Incandescent - 80+ CRI

LED-8015E40-G2 - 14W Rated Bollard Retrofit - 120-277V - 1918 Lumens - E26 Base - 4000K Cool White - Replaces Up To 100W Incandescent/70W HID - 80+ CRI

LED-8016E50-A - 16.5W Rated Bollard Retrofit - 120-277V - 2000 Lumens - E26 Base - 5000K Natural Light - Replaces Up To 125W Incandescent - 80+ CRI

LED-8015E50-G2 - 14W Rated Bollard Retrofit - 120-277V - 1960 Lumens - E26 Base - 5000K Natural Light - Replaces Up To 100W Incandescent/70W HID - 80+ CRI

LED-8016E30-A - 16.5W Rated Bollard Retrofit - 120-277V - 2000 Lumens - E26 Base - 3000K Warm White - Replaces Up To 125W Incandescent - 80+ CRI

LED-8015E30-G2 - 14W Rated Bollard Retrofit - 120-277V - 1792 Lumens - E26 Base - 3000K Warm White - Replaces Up To 100W Incandescent/70W HID - 80+ CRI

Satco 62-1143 - 20 Watts - 120V/277 Volts - 1400 Lumens - 3000K - White Finish - White Aluminum Shade - 90 CRI - 50000 Average Rated Hours

Satco 62-1191 - Blink Plus 15" LED Surface Mount Fixtures - 26W - 120V/277V - 3000K Warm White - 2000 Lumens - 90 CRI - Dimmable

The B50LP can be used with most 17 - 215 W (2’ - 8’) T8, T9, T10 or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline and energy-saving fluorescent lamps. One- or two-lamp operation may be selected (see Table 1). It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary

When AC power fails, the B50LP automatically switches to emergency power, operating one or two lamps at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp-life shutdown circuits.

Philips Bodine B50 Cold-Pak - Emergency Ballast - 90 Min.  Cold Environment Applications -20°C to 55°C Temperature Rating One- or Two-lamp Operation - 120-277 VAC - 60Hz - Up to 1200 Lumens @ 25°C - Single Pole Test Switch

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 1400 Lumens

LP600 / LP600M (Galvanized Metal Case), Flourescent Emergency Ballast, Low-Profile for Space-Limited Fixtiures, For Standard and High Output T5 and T8 Lamps. End-of-Lamp-Life Compatible and Compatible with TLED lamps. 

When AC power fails, the LP600 immediately switches to the emergency mode, operating one lamp at high lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of AC ballast end-of-lamp-life shutdown circuits.

Philips Bodine B50ST - Emergency Ballast - Up to 1400 Lumens Output - One- or Two-lamp Operation - 120-277 VAC, 50/60 Hz - Single Pole Test Switch

TCP - Emergency Ballast - 90 Min. - Operates (1) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 1300 Lumens

LED-8038E30-A - 14W Bollard Retrofit - 120-277V - 1840 Lumens - E26 Base - 3000K Warm White - Replaces Up To 70W HID - 80+ CRI

* This item has been discontinued. Please refer to the link below for the replacement suggested by the supplier

https://www.bulbspro.com/led-8038e345-a.html

LED-7342-27K-G2 - 25W - 120-277V - 2000 Lumens - G24q Base - 2700K Warm White - Replaces Up To 42W CFL - CRI >80

LED-7320-50K-G3 - 10W G24Q Retrofit - 120-277V - 1445 Lumens - G/GX24q Base - 5000K Natural Light - Replaces Up To 42W 4 Pin CFL - CRI >80

LED-7318-35A - 12W G24Q Retrofit - 120-277V - 1157 Lumens - G/GX24q Base - 3500K Neutral White - Replaces Up To 26W 4 Pin CFL - CRI >80

LED-7334-35K-G3 -11W Elec Ballast G24q Retrofit - Horizontal Mtn Orientation - 3500K - 1100 Lumens - G/GX24q Base - Replaces Up To 26W 4 Pin - 80+ CRI