Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Maple Armor FW397 - Power Supply and Charger Unit - 24Vdc - Maximum 12Amp

Be the first to review this product

The FW397 power supply and charger is a subassembly for the FW106 FACP (Fire Alarm Control Panel). It provides power supply output to the system (AMI, ALU, NOU, ROU, XNU, Addressable Loop Circuits, Notification Appliance Circuits, Relay output, Network circuits) with regulated 24VDC.
 

Availability: In stock

Call for price

Maple Armor FW397 - Power Supply and Charger Unit - 24Vdc - Maximum 12Amp

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Brochures & Specific Sheets


Stock Code FW397
Brand Maple Armor
Family Firewatcher Panel 106
Part No FW397 PCU
Length (in) 293mm
Width (in) 120.5mm
Height (in) 63.5mm
Power Rating (VA) Output Electrical Rating 24 VDC, 12 A max.
Voltage (V) 24Vdc
Amp Rating 12A
Wattage (w) 360W Maximum
Capacity 42AH
Charging Voltage 27.8Vdc
Max. Charge Current 3A
Start Temp. (Min) 32°F / 0°C
Start Temp. (Max) 120°F / 49°C
UL Listed UL, cUL lis
Notes Relative humidity - Up to 93% @ 90° F (32°C) To be installed in a normal dry indoor environment only
Cross Refefence The FW397 uses a microprocessor-controlled transfer circuit to switch the power supply for the system to standby batteries when AC power is off or low. It communicates to FW201 AMI to report fault conditions. The address (default is "1") is set using the rotary switch on the board.

It meets the UL86410th Edition Listed standard and the ULC-S527 3rdEdition listed standard and FM.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.