Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Lovato RGK610 - AUTOMATIC MAINS FAILURE (AMF) GEN-SET CONTROLLER - 12/24VDC - GRAPHIC LCD - USB/OPTICAL AND WI-FI POINT PROGRAMMING PORT ON FRONT - W/PICK-UP SPEED INPUT - EXPANDABLE WITH EXP... MODULES

Be the first to review this product

Lovato RGK610 - AUTOMATIC MAINS FAILURE (AMF) GEN-SET CONTROLLER - 12/24VDC - GRAPHIC LCD - USB/OPTICAL AND WI-FI POINT PROGRAMMING PORT ON FRONT - W/PICK-UP SPEED INPUT - EXPANDABLE WITH EXP... MODULES

 

Availability: In stock

$1,470.00

Lovato RGK610 - AUTOMATIC MAINS FAILURE (AMF) GEN-SET CONTROLLER - 12/24VDC - GRAPHIC LCD - USB/OPTICAL AND WI-FI POINT PROGRAMMING PORT ON FRONT - W/PICK-UP SPEED INPUT - EXPANDABLE WITH EXP... MODULES

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Additional Information

Brochures & Specific Sheets


Stock Code RGK610
Brand Lovato
UPC 8013975222669
Voltage (V) 12/24VDC
UL Listed EAC , cULus
Notes HS Code: 85389091
Cross Refefence Conformity:
IEC/EN 61010-1
IEC/EN 61000-6-2
IEC/EN 61000-6-3
UL 508
CSA C22.2 n° 14

General characteristics for RGK 600 - RGK 601 - RGK 610 - RGK 700 - RGK 800

– Power supply: 7...33VDC
– VAC inputs: Mains and generator L1-L2-L3-N
– Voltage control for one, two and three phase systems with or without neutral
– Rated measurement voltage:
• 480VAC for RGK 600, RGK 601 and RGK 610
• 600VAC for RGK 700 and RGK 800
– Rated measurement voltage range:
• 100...480VAC for RGK 600, RGK 601 and RGK 610
• 30...600VAC for RGK 700 and RGK 800
– Frequency measurement range: 45-65Hz
– Programmable VT ratio
– Current measurement range (3 PH): 0.050...6A or 0.050...1.2A
– Graphic LCD: 128x80 pixels with backlight
– 1 USB/optical and Wi-Fi port on front for programming
– Engine running detection: “D+”, generator voltage and frequency
– Engine speed inputs: “W” or Magnetic “Pick-up” (RGK 601 excluded)
– 1 CANbus-J1939 port (RGK 600 and RGK 610 excluded)
– 3 analog ohmic inputs for oil pressure, engine temperture and fuel level control
– 1 built-in alarm remote port
– Non-volatile memory for event storage
– Alarm, event and parameter text in 5 languages
– Alarm text customisable (8 alarms)
– Event log
– Modbus-RTU and Modbus-ASCII communication protocols (RGK 600 and RGK 601 excluded)
– Compatible with Synergy and Xpress software
– 1 slot for EXP module (EXP10 10, EXP10 11, EXP10 12) for RGK 610
– 3 slots for EXP modules for RGK 800.

For RGK 700 – RGK 800 only

– PLC logic for inputs, outputs and internal status
– 1 communication port: RS232 for RGK 700; RS485 for RGK 800
– Degree of protection: IEC IP65 on front; suitable for use with UL/CSA Type 4X outdoor enclosure installation.

For RGK 800 only

– Neutral current measurement range: 0.050...6A or 0.050...1.2A
– 400Hz frequency support
– 1 programmable analog input
– Modbus-TCP communication protocol
– Current leakage control towards earth/ground
– Clock-calendar (RTC).

Certifications and compliance

Certifications obtained: UL Listed, for USA and Canada (cULus - File E93601), as Auxiliary Devices - Generator controllers except pending for RGK 610; EAC.
Compliant with standards: IEC/EN 61010-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL 508, CSA C22.2 n° 14.

Synergy and Xpress software, See Section 27.

EXP series expansion modules See Section 28, page 2.


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.