Skip to Main Content »

Search Site
Your shopping cart is empty

All Prices are in Canadian Dollars

Conduit & Fittings

Items 2161 to 2180 of 152633 total
  1. Maple Armor FW752 - Non-Addressable Manual Station - 12 to 33Vdc - Red with Window Cover

    Maple Armor FW752 - Non-Addressable Manual Station - 12 to 33Vdc - Red with Window Cover

    FW751 or FW752 is normally an open initiating device made from durable materials and solid parts for longlasting performance. In case of fire, an alarm signal is generated by lifting the cover and pushing the button. A reset key (included) with the manual station. Termnals 3 & 4 are normally open dry contact, FW752 NC has normally closed dry contact.
    Learn More...
    Call for price

    Out of stock

  2. Maple Armor FW434 Module Box - Fit up to 16 Modules - 23" W x 13" H x 4" D

    Maple Armor FW434 Module Box - Fit up to 16 Modules - 23" W x 13" H x 4" D

    The FW434 and FW435 are module boxes allowing the installation of multiple Maple Armor modules into one cabinet. FW434 can fit up to 16 modules and FW435 can fit up to 8 modules. They integrate an external door, two mounting plates, and a backbox.
    Learn More...
    Call for price

    Out of stock

  3. Maple Armor FW435 Module Box - Fit up to 8 Modules - 14" W x 13" H x 4" D

    Maple Armor FW435 Module Box - Fit up to 8 Modules - 14" W x 13" H x 4" D

    The FW434 and FW435 are module boxes allowing the installation of multiple Maple Armor modules into one cabinet. FW434 can fit up to 16 modules and FW435 can fit up to 8 modules. They integrate an external door, two mounting plates, and a backbox.
    Learn More...
    Call for price

    Out of stock

  4. Maple Armor FW811 - Input Module Monitors a Single Contact - 24Vdc - Compatible EOLR FW421 (10K Ohms)

    Maple Armor FW811 - Input Module Monitors a Single Contact - 24Vdc - Compatible EOLR FW421 (10K Ohms)

    The FW811 input module monitors a single contact. The input line is monitored for open line faults and ground faults, and the contact must thus be wired with an end-of-line resistor. It is an intelligent addressable module and takes one address on the Signaling Line Circuit (SLC) or Data Communication Link (DCL) of the fire alarm control panel.
    Learn More...
    Call for price

    Out of stock

  5. Maple Armor FW811M - Mini Input Module Monitors a Single Contact - 24Vdc - Compatible EOLR FW421 (10KΩ)

    Maple Armor FW811M - Mini Input Module Monitors a Single Contact - 24Vdc - Compatible EOLR FW421 (10KΩ)

    The FW811M Input Module is designed to be inserted into a single gang utility box next to the dry contact device that it is monitoring. A remote red LED indicator connected to the red & black wires is used to show the module’s status.
    Learn More...
    Call for price

    Out of stock

  6. Maple Armor FW812 - Dual Input Module Supports two Class B Input Circuits - 24Vdc

    Maple Armor FW812 - Dual Input Module Supports two Class B Input Circuits - 24Vdc

    The FW812 dual input module supports two Class B input circuits, each of which can monitor a dry contact device. The input line is monitored for open line faults and ground faults, and the contact must be wired with an end-of-line resistor.
    Learn More...
    Call for price

    Out of stock

  7. Maple Armor FW821 - Input-Output Module Provides One 24VDC Output and One Feedback Input Monitor - 24Vdc

    Maple Armor FW821 - Input-Output Module Provides One 24VDC Output and One Feedback Input Monitor - 24Vdc

    The FW821 input-output module provides one 24VDC output and one feedback input monitor. The input line is monitored for open line faults and ground faults, and the contact must thus be wired with an end-of-line resistor. The output line is monitored for open lines, short-circuit faults, ground faults, and external 24VDC power source loss.
    Learn More...
    Call for price

    Out of stock

  8. Maple Armor FW831 - Relay Module Provides Two Control Relay Outputs - 24Vdc

    Maple Armor FW831 - Relay Module Provides Two Control Relay Outputs - 24Vdc

    The FW831 relay module provides two control relay outputs which will be activated simultaneously. When the outputs are activated, the device LED will indicate the event condition by red blinking. A return to normal condition will cause the event to disappear and the device LED indicator will return to the red idle condition.
    Learn More...
    Call for price

    Out of stock

  9. Maple Armor FW841 - Conventional Zone Module - 24Vdc

    Maple Armor FW841 - Conventional Zone Module - 24Vdc

    The FW841 conventional zone module is intended to allow Maple Armor intelligent fire alarm control panels to interface and monitor 2-wire conventional detectors in retrofit applications.
    Learn More...
    Call for price

    Out of stock

  10. Maple Armor FW851 - Isolator Module - Isolates the Short Point on SLC or DCL - 24Vdc

    Maple Armor FW851 - Isolator Module - Isolates the Short Point on SLC or DCL - 24Vdc

    The FW851 isolator module isolates the short point on the signaling line circuit (SLC) or Data Communication Link (DCL). The internal relay will be triggered to cut down the line power where the short trouble is detected. The device's yellow LED will indicate the trouble condition by turning steady on. A return to the normal condition will cause the internal relay to the normal position to restore the line power and the device LED indicator will turn off.
    Learn More...
    Call for price

    Out of stock

  11. Maple Armor FW859 - In-Suite Isolator Module - 24Vdc

    Maple Armor FW859 - In-Suite Isolator Module - 24Vdc

    The module FW859 Supervised In-Suite Isolator Module is designed for installations where disconnection of, or damage to an insuite audible device will not interfere with the ability of audible devices in other dwelling units, public corridors, or suites to sound on an alarm.
    Learn More...
    Call for price

    Out of stock

  12. Maple Armor MA-1100 - Weatherproof and Waterproof Wall box

    Maple Armor MA-1100 - Weatherproof and Waterproof Wall box

    The MA-1000 surface wall box is designed to be used with the FW-122 annunciator. The wall box is resistant to temperatures ranging from -40 to 49 degrees Celsius. In addition, it can be used with two ULC 20W -20W (24VCA/VCC) heating options that activate at 1oC and deactivate at 17oC.
    Learn More...
    Call for price

    Out of stock

  13. Maple Armor FW951 - Sync Module - Designed for FW961/FW971/FW981 Horn/Strobe - 16-33Vdc - Maximum 3A on Loop

    Maple Armor FW951 - Sync Module - Designed for FW961/FW971/FW981 Horn/Strobe - 16-33Vdc - Maximum 3A on Loop

    FW951 Sync Module is a device designed with FW961/FW971/FW981 Horn and/or Strobe with a built-in synchronization circuit to synchronize multiple FW961s in a complete fire alarm system.
    Learn More...
    Call for price

    Out of stock

  14. Maple Armor FW961 - Horn and Strobe - 16 - 33 VDC/VFWR

    Maple Armor FW961 - Horn and Strobe - 16 - 33 VDC/VFWR

    The FW961 combines both functions of horn and strobe in which two levels of light output is field selectable. The default setting is High, but where allowed, the and users may select the Low setting. Figure 1 shows relative light outputs in horizontal and vertical dispersion from strobes mounted on walls.
    Learn More...
    Call for price

    Out of stock

  15. Maple Armor FW971 - Horn Only - 16 - 33 VDC/VFWR

    Maple Armor FW971 - Horn Only - 16 - 33 VDC/VFWR

    FW971 Horn, Operating Voltage 16 - 33VDC/VFWR, Operating Current DC 17mA, FWR 35mA, Compatible FW951 Sync Module, Indoor Use
    Learn More...
    Call for price

    Out of stock

  16. Maple Armor FW981 - Strobe Only - 16 - 33 VDC/VFWR

    Maple Armor FW981 - Strobe Only - 16 - 33 VDC/VFWR

    FW981 Strobe, Operating Voltage 16 - 33VDC/VFWR, Operating Current DC 75mA, FWR 75mA, Compatible FW951 Sync Module, Indoor Use
    Learn More...
    Call for price

    Out of stock

  17. Maple Armor FW962GR - Horn and Strobe - 16-33VDC/FWR - Red Color

    Maple Armor FW962GR - Horn and Strobe - 16-33VDC/FWR - Red Color

    FW962GR, Multi Candela Horn and Strobe, 16-33VDC/FWR, Horn Pattern Temporal 3, Strobe Pattern 1 Flash per Second, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP
    Learn More...
    Call for price

    Out of stock

  18. Maple Armor FW962GW - Horn and Strobe - 16-33VDC/FWR - White Color

    Maple Armor FW962GW - Horn and Strobe - 16-33VDC/FWR - White Color

    FW962GW, Multi Candela Horn and Strobe, 16-33VDC/FWR, Horn Pattern Temporal 3, Strobe Pattern 1 Flash per Second, White Color, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP
    Learn More...
    Call for price

    Out of stock

  19. Maple Armor FW982GR - Strobe Only - 16-33VDC/FWR - Red Color

    Maple Armor FW982GR - Strobe Only - 16-33VDC/FWR - Red Color

    FW982GR, Multi Candela Strobe Only, 16-33VDC/FWR, Strobe Pattern 1 Flash per Second, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP
    Learn More...
    Call for price

    Out of stock

  20. Maple Armor FW982GW - Strobe Only - 16-33VDC/FWR - White Color

    Maple Armor FW982GW - Strobe Only - 16-33VDC/FWR - White Color

    FW982GW, Multi Candela Strobe Only, 16-33VDC/FWR, Strobe Pattern 1 Flash per Second, White Color, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP
    Learn More...
    Call for price

    Out of stock

Items 2161 to 2180 of 152633 total