Conduit & Fittings

B100 available only as as ELC (end-of-lamp-life compatible). One 17-215 W (2’- 8’) T8, T10 or T12 lamp or one (4-pin) long compact. Not recommended with reduced-wattage, energy-saving T8 lamps.

When AC power fails, the B100 immediately switches to the emergency mode, operating one lamp at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp-life shutdown circuits.

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 1400 Lumens

Philips Bodine B50 Cold-Pak - Emergency Ballast - 90 Min.  Cold Environment Applications -20°C to 55°C Temperature Rating One- or Two-lamp Operation - 120-277 VAC - 60Hz - Up to 1200 Lumens @ 25°C - Single Pole Test Switch

TCP - Emergency Ballast - 90 Min. - Operates (1) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 800 Lumens

The B33 can be used with two or three 32 W (4’) T8 fluorescent lamps without integral starters. It is compatible ONLY with instant start, parallel two-, three- or four-lamp electronic or standard AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The B33 is suitable for indoor and damp locations.

When AC power fails, the B33 immediately switches to the emergency mode, operating either two or three lamps for a minimum of 90 minutes. When AC power is restored, the B33 automatically returns to the charging mode.

M130 HX-HPF 120/277V Ballast - For One 35/39 Watt Metal Halide Lamp

Philips Advance 71A5593500DEE - Metal Halide - EISA Compliant C & C Ballasts - 175 Watt - M137/M152 - 120/208/240/277V - 90% Power Fact

27 Watt; LED PAR38; 4000K; 40 deg. Beam Angle; Medium base; 100-277 Volt

M98/M143 HX-HPF 120/277V Ballast - For One 70 Watt Metal Halide Lamp

* This model was discontinued and has been replaced by its Tri-tap (120/277/347) version, the new model code is EMZAFTJ70F 

Philips Advance 71A5892001D - Metal Halide - C & C Ballasts - 320 Watt - M132/154 - 120/208/240/277V - 90% Power Fact

Philips Advance 71A5570001D - Metal Halide Ballasts - 175 Watt - M57 - 120/208/240/277V - 90% Power Fact

HID Ballast - High Pressure Sodium F-Can - 50W S68 Lamp Wattage - HX-HPF - 120/277V

Philips Advance 71A5770001D - Metal Halide - C & C Ballasts - 250 Watt - M58 - 120/208/240/277V - 90% Power Fact

Philips Advance 71A5390001D - Metal Halide Ballasts - 100 Watt - M90/140 - 120-277V - 90% Power Fact

HID Ballast - High Pressure Sodium F-Can - 100W S54 Lamp Wattage - HX-HPF - 120/277V

Philips Advance 71A5993001D - Metal Halide - C & C Ballasts - 350 Watt - M131 - 120/208/240/277V - 90% Power Fact

Philips Advance 71A5593001D - Metal Halide Ballasts - 175 Watt - M137/M152 - 120/208/240/277V - 90% Power Fact

27 Watt; LED PAR38; 3000K; 40 deg. Beam Angle; Medium base; 100-277 Volt

M110 HX-HPF 120/277V Ballast - For One 50 Watt Metal Halide Lamp