Conduit & Fittings
-
Maple Armor FW751 - Non-Addressable Manual Station - 12 to 33Vdc - Red with Window Cover
FW751 or FW751C is normally open initiating device made from durable materials and solid parts for long-lasting performance. In case of fire, an alarm signal is generated by lifting the cover and pushing the button. A reset key (included) with the manual station. Terminals 3 & 4 are normally open dry contacts. Learn More...
Call for price
Out of stock
-
Maple Armor FW752 - Non-Addressable Manual Station - 12 to 33Vdc - Red with Window Cover
FW751 or FW752 is normally an open initiating device made from durable materials and solid parts for longlasting performance. In case of fire, an alarm signal is generated by lifting the cover and pushing the button. A reset key (included) with the manual station. Termnals 3 & 4 are normally open dry contact, FW752 NC has normally closed dry contact. Learn More...
Call for price
Out of stock
-
Maple Armor FW811 - Input Module Monitors a Single Contact - 24Vdc - Compatible EOLR FW421 (10K Ohms)
The FW811 input module monitors a single contact. The input line is monitored for open line faults and ground faults, and the contact must thus be wired with an end-of-line resistor. It is an intelligent addressable module and takes one address on the Signaling Line Circuit (SLC) or Data Communication Link (DCL) of the fire alarm control panel. Learn More...
Call for price
Out of stock
-
Maple Armor FW821 - Input-Output Module Provides One 24VDC Output and One Feedback Input Monitor - 24Vdc
The FW821 input-output module provides one 24VDC output and one feedback input monitor. The input line is monitored for open line faults and ground faults, and the contact must thus be wired with an end-of-line resistor. The output line is monitored for open lines, short-circuit faults, ground faults, and external 24VDC power source loss. Learn More...
Call for price
Out of stock
-
Maple Armor FW831 - Relay Module Provides Two Control Relay Outputs - 24Vdc
The FW831 relay module provides two control relay outputs which will be activated simultaneously. When the outputs are activated, the device LED will indicate the event condition by red blinking. A return to normal condition will cause the event to disappear and the device LED indicator will return to the red idle condition. Learn More...
Call for price
Out of stock
-
Maple Armor FW841 - Conventional Zone Module - 24Vdc
The FW841 conventional zone module is intended to allow Maple Armor intelligent fire alarm control panels to interface and monitor 2-wire conventional detectors in retrofit applications. Learn More...
Call for price
Out of stock
-
Maple Armor FW851 - Isolator Module - Isolates the Short Point on SLC or DCL - 24Vdc
The FW851 isolator module isolates the short point on the signaling line circuit (SLC) or Data Communication Link (DCL). The internal relay will be triggered to cut down the line power where the short trouble is detected. The device's yellow LED will indicate the trouble condition by turning steady on. A return to the normal condition will cause the internal relay to the normal position to restore the line power and the device LED indicator will turn off. Learn More...
Call for price
Out of stock
-
Maple Armor FW951 - Sync Module - Designed for FW961/FW971/FW981 Horn/Strobe - 16-33Vdc - Maximum 3A on Loop
FW951 Sync Module is a device designed with FW961/FW971/FW981 Horn and/or Strobe with a built-in synchronization circuit to synchronize multiple FW961s in a complete fire alarm system. Learn More...
Call for price
Out of stock
-
Maple Armor FW961 - Horn and Strobe - 16 - 33 VDC/VFWR
The FW961 combines both functions of horn and strobe in which two levels of light output is field selectable. The default setting is High, but where allowed, the and users may select the Low setting. Figure 1 shows relative light outputs in horizontal and vertical dispersion from strobes mounted on walls. Learn More...
Call for price
Out of stock
-
Maple Armor FW971 - Horn Only - 16 - 33 VDC/VFWR
FW971 Horn, Operating Voltage 16 - 33VDC/VFWR, Operating Current DC 17mA, FWR 35mA, Compatible FW951 Sync Module, Indoor Use Learn More...
Call for price
Out of stock
-
Maple Armor FW981 - Strobe Only - 16 - 33 VDC/VFWR
FW981 Strobe, Operating Voltage 16 - 33VDC/VFWR, Operating Current DC 75mA, FWR 75mA, Compatible FW951 Sync Module, Indoor Use Learn More...
Call for price
Out of stock
-
Maple Armor FW962GR - Horn and Strobe - 16-33VDC/FWR - Red Color
FW962GR, Multi Candela Horn and Strobe, 16-33VDC/FWR, Horn Pattern Temporal 3, Strobe Pattern 1 Flash per Second, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW962GW - Horn and Strobe - 16-33VDC/FWR - White Color
FW962GW, Multi Candela Horn and Strobe, 16-33VDC/FWR, Horn Pattern Temporal 3, Strobe Pattern 1 Flash per Second, White Color, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW982GR - Strobe Only - 16-33VDC/FWR - Red Color
FW982GR, Multi Candela Strobe Only, 16-33VDC/FWR, Strobe Pattern 1 Flash per Second, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW982GW - Strobe Only - 16-33VDC/FWR - White Color
FW982GW, Multi Candela Strobe Only, 16-33VDC/FWR, Strobe Pattern 1 Flash per Second, White Color, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW971GR - Horn Only - 16-33VDC/FWR - Red Color
FW971GR, Horn Only, 16-33VDC/FWR, Horn Pattern Temporal 3, Red Color, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW971GW - Horn Only - 16-33VDC/FWR - White Color
FW971GW, Horn Only, 16-33VDC/FWR, Horn Pattern Temporal 3, White Color, Indoor Use, Compatible Model FW951 Sync Module, FW106, FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW963AGR - Addressable Multi Candela Horn and Strobe - 24Vdc - Red Color
FW963AGR, Red Color, Addressable Multi-Candela Visual and Audible Signal Appliance, Operating Voltage 16 to 33Vdc (Regulated 24VDC), Horn Pattern Temporal 3, Strobe Pattern 1 Flash per Second, Indoor Use, Compatible Model FW106 / FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW963AGW - Addressable Multi Candela Horn and Strobe - 24Vdc - White Color
FW963AGW, White Color, Addressable Multi-Candela Visual and Audible Signal Appliance, Operating Voltage 16 to 33Vdc (Regulated 24VDC), Horn Pattern Temporal 3, Strobe Pattern 1 Flash per Second, Indoor Use, Compatible Model FW106 / FW106C FACP Learn More...
Call for price
Out of stock
-
Maple Armor FW983AGR - Addressable Multi Candela Strobe Only - 24Vdc - Red Color
FW983AGR, Red Color, Addressable Multi-Candela Visual Signal Appliance, Operating Voltage 16 to 33Vdc (Regulated 24VDC), Strobe Pattern 1 Flash per Second, Indoor Use, Compatible Model FW106 / FW106C FACP Learn More...
Call for price
Out of stock
