Conduit & Fittings

Philips Bodine B50ST - Emergency Ballast - Up to 1400 Lumens Output - One- or Two-lamp Operation - 120-277 VAC, 50/60 Hz - Single Pole Test Switch

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 700 Lumens

The B33 can be used with two or three 32 W (4’) T8 fluorescent lamps without integral starters. It is compatible ONLY with instant start, parallel two-, three- or four-lamp electronic or standard AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary. The B33 is suitable for indoor and damp locations.

When AC power fails, the B33 immediately switches to the emergency mode, operating either two or three lamps for a minimum of 90 minutes. When AC power is restored, the B33 automatically returns to the charging mode.

Philips Bodine B30ST - Emergency Ballast - 90 Min. - Operates (1) or (2) AC/DC Output for T5 or T8 lamps - 120-277 VAC - 50/60Hz - Emergency mode lumen output up to 3500 lumens - Two-wire illuminated test switch

TCP - Emergency Ballast - 90 Min. - Operates (1) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 1300 Lumens

TCP - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 3000 Lumens

Bodine B50 Emergency Ballast Up to 1400Lumen, One 17-215 W (2‘-8’) or two 17-40 W (2’-4’) T8, T9, T10 or T12 lamps, or one 18-55 W or two 18-39 W (4-pin) long compacts. Provides AC output for one T5 or T8, DC output for one or two T8s, Low-profile design, Compatible with Philips InstantFit LED T8 retrofit lamps and others, Compatible with end-of-lamp-life circuitry. 120-277VAC.

Philips Bodine B30 - Emergency Ballast - 90 Min. - Operates (1) or (2) T5, T8 Fluoresent Lamps - Universal Voltage 120-277V - Emergency mode lumen output up to 3500 lumens - Two-wire illuminated test switch

TCP - Emergency Ballast - 90 Min. - Operates (1) T8, T12 Fluoresent Lamps - Dual Voltage 120/277V - Damp Location - 500 Lumens

The B50LP can be used with most 17 - 215 W (2’ - 8’) T8, T9, T10 or T12 fluorescent lamps without integral starters, including U-shaped, HO, VHO, circline and energy-saving fluorescent lamps. One- or two-lamp operation may be selected (see Table 1). It is also compatible with most one-, two-, three- and four-lamp electronic, standard, energy-saving and dimming AC ballasts. If used in an emergency-only fixture, no AC ballast is necessary

When AC power fails, the B50LP automatically switches to emergency power, operating one or two lamps at a reduced lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of the AC ballast end-of-lamp-life shutdown circuits.

LP600 / LP600M (Galvanized Metal Case), Flourescent Emergency Ballast, Low-Profile for Space-Limited Fixtiures, For Standard and High Output T5 and T8 Lamps. End-of-Lamp-Life Compatible and Compatible with TLED lamps. 

When AC power fails, the LP600 immediately switches to the emergency mode, operating one lamp at high lumen output for a minimum of 90 minutes. When AC power is restored, the emergency ballast automatically returns to the charging mode and, using a patented circuit, delays AC ballast operation for approximately three seconds to prevent false tripping of AC ballast end-of-lamp-life shutdown circuits.

Philips Bodine B50 Cold-Pak - Emergency Ballast - 90 Min.  Cold Environment Applications -20°C to 55°C Temperature Rating One- or Two-lamp Operation - 120-277 VAC - 60Hz - Up to 1200 Lumens @ 25°C - Single Pole Test Switch

48" - T12 - G13 Base -  Warm White -  F40T12/735 - 40 Watt

*****Listed price is for the whole pack of 30 Pcs

Philips Lighting 376491 - T12 Rapid Start  3- Foot Fluorescent Lamps - Medium Bi-Pin (G13) Base - 30W - 1950 Lumens - 6500K Daylight - 79CRI

List price is for whole pack of 30 pieces

36" - T12 - G13 Base -  Warm White - F30T12/WW

Satco S6638 - 40 Watt - T12 Fluorescent - Gloss White - Medium Bi Pin Base - 2400 Lumens - 6500K Daylight - 30 Packs - 24000 Average rated Hours

List price is for whole pack of 30 pieces.

Satco S6649 - 40 Watt - T12 Fluorescent - White - Medium Bi Pin Base - 2400 Lumens - 6500K Daylight - 2 Packs - 24000 Average Rated Hours

List price is for whole pack of 2 pieces.

48" - T12 - G13 Base -  Daylight -  F40T12/850/24M - 40 Watt

*****Listed price is for the whole pack of 30 Pcs

48" - T12 - G13 Base -  Cool White -  F30T12/741 - 34 Watt

*****Listed price is for the whole pack of 30 Pcs